I primi 10 flexoproducts.com competitors

sani-depot.ca

Les tests rapides rendent disponibles des résultats après seulement quelques minutes. Apprenez quand et comment effectuer un test antigénique.

bunzlch.ca

As Canada’s largest cleaning and hygiene specialist supplier, we help organizations right across Canada maintain healthy spaces to work, live and play in.

info.waxie.com

Grouted surfaces, such as tiled floors can be breeding grounds for mold, bacteria and odors if not properly cleaned. WAXIE Grouted Tile Maintenance System fights back soil and hard water buildup making it the perfect solution.

systemhygiene.co.uk

System Hygiene specialise in Janitorial Supplies and Hygiene Systems. We offer next day delivery on some of the UK’s leading cleaning brands.

kayswholesale.ca

Dairy Milk OREO Bar REGULAR Size 38g - 12/BOX (12) (01444): P22

cleanprosupply.com

ResinForce Water Based Urethane Matte - 1.5 Gallon Kit (Mix 2:1) Two Component 6100 WB URETHANE MATTE SURFACE PREPARATION:The concrete surface must be deemed mechanically and structurally sound, thoroughly clean of debris and completely dry.  Concrete must be fully cured a minimum of 28 days.  Proper moisture testing should be performed prior to applying this product.  It is recommended to prepare the concrete surface by mechanical means such as shot blasting or diamond grinding with 30 grit or coarser diamonds to achieve a CSP-2 to CSP-3 profile.  Vacuum concrete surface several times, until dust is thoroughly removed.  If applying over an existing, fully bonded coating that is outside it's recommended re-coat window, the surface should be sanded thoroughly with a 60-120 grit sanding screen until the surface is completely dulled with scratches.  Clean dust thoroughly. Substrate, air and material temperatures must be no less than 50°F and not exceed 80°F.  If applied outside these limits, the coating may not achieve adequate film formation and may have excessive air entrapment, bubbles, blushing, or hazing.  Please note that higher substrate, air, and material temperatures as well as excessive humidity may speed the cure rate of this product.  Cooler temperatures and lower humidity may slow the cure rate of this product. MIXING:If mixing less than a full kit, mix Part A and Part B separately with a stir stick, low speed mixer or vigorously shake containers prior to measuring out the smaller kit to ensure uniform distribution of all ingredients.  In a clean mixing container, blend 2 Parts A and 1 Part B using a drill mixer for 2-3 minutes.  Up to 10% clean water may be added AFTER blending Parts A and B to help reduce roller marks, orange peel, etc.  Avoid creating a vortex in the material which could introduce air and/or moisture content t

michco.com

janitorial supplies and floor machine replacement parts for kent, advance, nilfisk, betco, minuteman, clarke, square scrub, proteam, mighty mac, deb sbs, sca, tork, and others.