Properties: Two component epoxy resin system: 50%** bio-based resin and hardener (**biobased carbon represents on average 50% of the total carbon present in the resin) Transparent, glossy and solid Mixing: 1 part Crystal B hardener to 2 parts Cristal A resin Casting thickness: up to 2 cm thick, it is not recommended for casting large pieces Setting time: Dry: 12h / Fully set: 24h Cleaning tools before beginning: With a dry cloth (brushes, spalters and spatulas) and 70% alcohol (commercially available) or alcohol gel. Storage: In their original packaging, fully sealed, and stored at between 15° C and 25° C. Keep away from freezing temperatures. 6 months in the sealed bottle after opening. Applications: Transparent, glossy and solid, Crystal resin is ideal for casting in moulds or on rimmed supports (jewellery, frames), inclusions and even as a protective varnish. You can add dried plants to the casts. Once cured, the resin will not withstand prolonged contact at temperatures above 50°C or below 0°C. Media: Multi-surfaces: Metal, painted wood, canvas, silicone, plastic ... How to use: 1. In a clean, dry container first pour 1 part Crystal B hardener then 2 parts Crystal A resin. 2. Mix the two components all the way to the corners of the container (insufficient mixing will not guarantee a proper curing, and over-mixing will cause bubbling). Transfer the mixture to a second container and mix again to ensure the consistency of the resin and optimum mixing. Mixing can take up to 5 minutes depending on the amount prepared. 3. Let the mixture sit in the container for 5 minutes to remove any bubbles. 4. Pour into or onto your medium of choice. Do not keep the mixture in the mixing container for more than 45 minutes after mixing 5. Allow to dry 24 hours in a dust-free area. Setting is gradual and may vary depending on the ambient temperature. Gédéo tips: In case of moulding: To know the amount of each component and not waste the product, fill the mould you want to us