Analisi del Market Share dell'azienda Turbine Products Llc per il mese di marzo 2026

Description Reviews Description This system with full face mask was designed for painters/refinishers when cartridge type respirators are not allowed or clog too quickly (spraying isocyanates, stripping finishes, sanding body filler, using cyanoacrylates, etc.) It provides eye protection and coverage of exposed skin on the face. If wearing the mask during spray painting, the user must wear a spray sock underneath to protect the ears, neck and head from overspray. Lens covers should be used to protect the lens from overspray. The system consists of: High capacity, portable 1000 watt 120 VAC electric air turbine w/thermal overload protection Bypass, tangential discharge air turbine Rheostat dial allows you to control the amount of air flow Does not heat up your breathing air! 25' length of 3/4" non-toxic (phthalate free) kink proof lightweight high flex air hose (other lengths available) Reinforced breathing tube w/quick connector 2" wide nylon web belt adjustable from 34-72" w/snap connector Silicone full face mask size M Side-mounted breathing tube does not interfere with work 5 stick-on lens protectors Flowmeter Full 1 Year Warranty! The system will provide safe, cool, filtered breathing air for one user at up to 400' air hose length. This system HAS NOT been submitted for NIOSH approval. The air pump must be placed in an area with at least Grade "D" breathable air Frequently asked Questions When do I need to use a supplied air system? And which face mask/hood option should I get, is one safer than another? It is recommended that you use supplied air for breathing anytime you are applying finishes that contain isocyanates, are working with toxic chemicals or gases that are not filtered by cartridge type respirators, such as methylene chloride, or carbon monoxide, or are in a very dusty environment and a cartridge type respirator will quickly become clogged. You should use supplied air when working in contaminated areas – such as when working in mold conta