evolveelectrics.comの競合サイトトップ10

legacyev.com

Legacy EV delivers plug-and-play EV education and workforce training, including instructor training, LMS-based curriculum, and proprietary hands-on EV hardware. From K–12 STEM and higher-ed CTE to professional technicians, we prepare learners at every stage for EV careers.

evwest.com

Thunderstruck’s Dilithium Design BMS satellites communicate with a central BMS controller via daisy-chained isoSPI networks. These satellites enable monitoring of large battery packs with flexible cell configurations. Note that BMS satellites cannot function independently—they r...

thunderstruck-ev.com

The Dilithium Vehicle Control Unit (VCU) converts throttle, direction and brake inputs into CAN bus messages that drive an EV motor inverter/controller. It has been designed to work with the Gen1 (2011-12), Gen2 (2013-17) and Gen3 (2018+) Nissan Leaf, UQM-Danfoss PowerPhase® HD System, and Coda UQM inverters. When using Nissan Leaf drive systems, the VCU does not control the Nissan power distribution unit or battery management system. If you need a DCDC, BMS or Charger please look over our Chargers, DCDC and Battery Management sections of the website. For UQM systems, inverter configuration is required. See the Installation and Operation Manual P/N 87510-011, and CANbus Interface Manual P/N 87510-009 from UQM-Danfoss Technologies. No inverter configuration is needed for Leaf inverters. The serial cable is required for configuration and troubleshooting, and can be shared with other components purchased from ThunderStruck. Other cables may be used if matching the following FTDI specification: TTL-232R-5V-AJ The Optional Accessory kit provides components and connections between VCU and throttle, precharge circuit, main contactor, and direction switch (see the Included Components tab). Component wires have connectors attached, and are labeled for easy assembly. The Accessory Kit saves considerable time for you at very little more than the price of components. It saves us time on the phone later answering questions about how to wire it up. Please contact us for more information. Here's a very interesting video by Ben Nelson about bench testing a Nissan Leaf/VCU system using a high voltage DC power supply: VCU Bench Testing 2023 UpdateCheck out this awesome video by Frank Graffagnino showing his bench test setup for a Nissan Leaf motor. Frank is using our VCU with the accessory kit option, which simplifies assembly.

go-ev.com

distributor of hyper and warp motors for hybrid and electric vehicles

amprevolt.com

ampREVOLT offers custom electric vehicle conversions as well as EV parts & kits for DIY builds and OEM vehicles. With a zero emission electric drive you can break your fossil fuel habit!

evworks.com.au

home energy storage, ev conversion