gp-factor.comの競合サイトトップ10

fnwheels.com

Special introductory pricing extended! 17x9" FN Wheels / Konig Countersteer Type X Flow Formed - complete set of four wheels Diameter: 17" Width: 9" Offset: -25mm Backspacing: 4" Bolt pattern (PCD): 6x139.7mm Center bore: 106.2mm (Toyota hub centric) Stud opening: 16.2mm diameter (accepts extended thread aka "ET" lug nuts for maximum stud engagement on short, OEM Toyota wheel studs) Load rating: 2,500lbs+ per wheel with up to a 37" tire diameter Wheel weight: 24lbs Manufacturing details: Flow formed from high purity A356.2 T6 aluminum alloy. Certification: DOT, JWL-T, VIA, and SAE J-2530 approved (SAE J-2530 is an extremely stringent, voluntary testing standard that is stricter than DOT, JWL-T, and other governmental testing standards). Center cap: Included. Additional features: Knurled bead seats for enhanced bead retention at low psi. Reinforced inner and outer lips/flanges for increased strength and rigidity. Special high strength / high clearance barrel design for maximum brake clearance. Colors Available: Matte Black - In-stock. Matte Bronze - In-stock. Matte Gunmetal - In-stock. Graphite Gunmetal (High Gloss)- In-stock. Additional information: The 17x9" -25mm offset 6x139.7 FN Wheels / Konig Countersteer Type X flow formed wheels are an updated version of our popular 16x8" / 17x8" Countersteer Type X. This wheel is the result of customer feedback and requests for a wider, lower offset version of the Countersteer Type X that is able to support larger tires while providing more clearance for custom suspension setups. The negative offset and 9" rim width provide an aggressive stance and plenty of suspension clearance with support for oversize widths and diameters. All 17x9" -25mm offset Countersteer Type X flow formed wheels feature a heavy duty 2,500lbs+ (per wheel) load rating as tested to the stringent SAE J-2530 standard all the while maintaining a relatively light wheel weight of approximately 24lbs per whee