krownlab.comの競合サイトトップ10

divinedesigncenter.com

Divine Design Center is located in Boston's North End, and is ready to create your dream home with modern and traditional kitchens, wardrobes, furniture, bathrooms, and more using custom European brands such as LEICHT, TEAM 7, Rolf Benz, Arrital, Miele, Gaggenau, and Leolux, and more.

crown-industrial.com

...

reclaimedlumberproducts.com

Tips, techniques, and hints for installing pairs of barn doors or long sliding hardware over wide or big openings. First plan that you need some overlap for doors to be larger than the opening. A sheetrock wrapped opening is easier to work with than a cased opening with trim.  If the track needs to mount to the front face of the header trim it will require that to be a flat surface for the full length of the track including the space above the opening and the distance to one side.  Don't count on trim to provide structural support. Whether you have trim or not all of the track's lag screws need to go into solid support.  Our tracks are sold with or without mounting holes predrilled.  If you are trying to catch studs in the wall, order the track undrilled.  If you have solid blocking or a structural header for the full length of the track then order it predrilled which will have holes evenly spaced the entire length of the track.  If you do not mount the track to the front face of the trim then it can be mounted vertically above the trim.  Refer to our track installation instructions for a drawing that shows the gap behind the door slab.  Be sure to consider what thickness of door you have and consider if there is enough clearance to not rub on your trim.  If it is too tight you could countersink the bolts that mount the hanger, adjust axle spacers for our hanger plate and wheel, and/or put a thicker ledger behind track before mounting it to the wall. Finally, if it is a sheetrock wrapped opening usually you only need to worry about clearing light switches or baseboards.  When considering the overlap we usually recommend about 1 1/2

realslidinghardware.com

Download the FREE Barn Door Design Guide by RealCraft to learn everything you need to know before buying your barn door.

johnsonhardware.com

A versatile single track system designed and packed primarily for "on-the-job" construction of pocket doors, but also usable in combination with itself or other Johnson series tracks for special installations of sliding doors. Aluminum track with convex rails, jump proof three wheel hangers. Heavy gauge steel components are zinc plated for a quality appearance. Components are available in bulk for fabricators, as are fixtures for assembly of pocket door frames. 100PDSC Series Pocket Door Hardware Pocket Door Hardware Sets contain all necessary hardware for a single pocket door installation (door, jambs, drywall, door locks, door pulls, hidden pocket door guide kit NOT included). Track CAN be cut down to fit smaller door widths. Note: When used in a Pocket Door Application, 28" is the minimum door width possible with Soft-Close/Open (soft opperation in both directions), 20" is the minimum door width possible with Soft-Close only (soft opperation in single direction). How to order 100PDSC Series Pocket Door Hardware: 1. Determine your door width. 2. Select a hardware set part number that accommodates your door width. Don't see your exact door size? Remember that track can be cut down to accommodate smaller door widths.

absupply.net

Offset ArborTek Wood Grip Pull Bar, Round Ends, 1-1/4" Diameter, 48" Overall Length (OA), Wood Specie: Walnut, Wood Finish: Tung Oil, Posts & Ends material: Black Suede Powder Coat

epcohardware.com

epco - engineered products

doorware.com

doorware.com has been selling door hardware online for over 20 years. find all the top manufactures and all the knobs, levers, handles, locks and hinges you need!

hangingdoorhardware.com

barn door hardware - stacking doors - sliding door rollers and track