Топ-10 конкурентов arcadecontrols.com

ultimarc.com

64 Channel LED controller with full brightness control Features: 64 LED channels with 256 brightness levels for full RGB color mixing NEW FEATURE! Can be set to flash any or all LEDs at one of 3 rates, without PC control. Can be used with single-color or RGB LEDs (RGB use 3 channels) Constant current negates the need for resistors for each LED Can be used with LEDs with inbuilt resistors if required 128-command flash storage for “attract-mode” sequences which run immediately on power-up with no PC present Supports single-command fades with preset speed on-board. Multiple fades can overlap Comes with power cable for plugging into a PC disk drive power connector, and USB cable User-assigned IDs allow multiple boards to be connected Extensive software support including test application, Software Development kit for adding support to your own programs, and LedBlinky third-party software Compact modular connectivity. Our Ultralux RGB pushbuttons simply plug in. Other harnesses and connectors available. Kit Contents: PacLED64 Board. USB Cable Power cable for connection to PC HDD power 2 x 48-way empty connector housings. Wires with crimp contacts (ordered separately if required) push into these. Installation. Connecting LEDs Each LED must have its negative connection (cathode) connected to one of the numbered pins 1-64. Each LED must also have its positive (anode) connection connected to one of the supply pins marked “+”. Note it does not matter which of the “+” pins you use as they are all connected together on the board. You can daisy-chain multiple LED + connections and connect to one + pin. The picture below shows a schematic representation of three LEDs connected to channels 31-33 Note that if using Ultimarc Ultralux RGB pushbuttons, no additional connectors nor wiring is required. These have built-in wiring and connectors available in 2

aussiearcade.com

Fixing Pinball machines around the Central Coast and Newcastle areas ,Pinball circuit boards repaired , Prom / Eprom programming and Pinball rom sales. Phone 0468 341 839

arcade-projects.com

Arcade-Projects is the premier community forums for user created projects since 2015

forums.arcade-museum.com

This has been a leading discussion forum for coin-operated videogames, pinball, and slot machines for over 20 years.

keysticks.net

The Inputs tab of the Profile Designer is where you configure which controller(s) you want to use. By default, Keysticks creates a layout and input mappings for a standard gamepad like an Xbox 360 controller, so very often you won't need to change these. However, you might like to change the background image, just for

remotegamepad.com

Use your phone as a gamepad for your PC. Play games on your PC using your phone as a game controller.

thunderstickstudio.com

GRS Arcade Spinner Steering Wheel Features GRS Arcade Spinner Steering Wheel is Compatible with all series of GRS Spinner including TS-USP-01/02(GRS spinner v2), TS-BSP-01/02(GRS button hole spinner) and TS-DOT-01/02(GRS Push & Pull Spinner),TS-SPTB-COMBO(Spinner trackball combo kit) Unleash your Inner GRS Arcade Racing God Nothing gets the competitive spirit going quite like a racing game. That's the reason why people got so hooked on this genre since they were introduced by Atari with their game Space Race in 1973 But the next-gen racing games and controllers truly defined the genre. With their realistic wheel controller, they introduced players to a new, more satisfying gaming experience unlike ever before. With the GRS Arcade Spinner Steering Wheel, you can tum your standard Arcade1 Up board into a racing-ready setup.  Enjoy all your favorite Arcade Racing Games  Whether ifs Outrun, Turbo, Cruising USA, Daytona USA, or any other retro racing game or driving simulator, GRS Arcade Spinner Steering Wheel makes your gameplay flawless and smooth. Compatible with GRS Spinner V2 (TS-USP-02) and GRS button hole spinner (TS-BSP-01) High-end engineered plastic  3D printed Flawless Design and GRS Spinner Compatibility The GRS Steering Wheel is designed specifically for the GRS Arcade Spinner and can be attached right over it with secure mounting screws to hold it in place.   High-end engineered components  The GRS Arcade Spinner Steering Wheel is 30 printed using highly durable plastic and an aluminum faceplate. The plastic offers a comfortable gaming experience with sweat-resistant and non-slip control while ensuring a comfortable gaming experience even when you're hours into your gaming session.     Buy Via Micro centre

buystuffarcades.com

The amazing TV Stand that can transform between Horizontal Gaming or TV viewing, Vertical Gaming or tilt forward for the Pinball experience is waiting for your order! PLUS now it can optionally tilt straight in the lower position, perfect for sit-down gaming including with our upcoming Driving Cab. https://www.buystuff