Satin Urethane Concrete Coating Tired of underperforming concrete coatings? Tired of the sealing process taking hours a day? Welcome to the best concrete countertop sealer on the market today. MudShield 45S is a high performance Solvent Based Urethane concrete coating for high traffic commercial or residential use. This Satin Urethane can be used inside and outside for long lasting protection. To enhance this coating’s grip power even more, we have added a “C” component that acts as an Adhesion Promoter. While the system does not require the “C” component to function properly, we have found this additive bridges some of the issues with traditional urethanes. We supply you with throw away pipettes that make measuring quick & simple. MS-45S is a great sealer for use on concrete countertops, bar tops, concrete sinks, concrete tables, concrete wall panels, concrete floors, and many other concrete applications. Quick sealing Consistent results UV Stable Chemical Resistant Endless Sheen Level Options Sheen: Clear Satin Kit Size: One Gallon Kit Mix Ratio: 3A : 1B + C (see chart below) Application: Indoor & Outdoor Use Pot Life: 2 hrs @ 70 degrees Dry Time @ 70 degrees: Dry to touch - 2 to 4 hours Re-coat-4 hrs minimum Coverage: 5 sqft / oz Sqft/Gal: 250 sqft @ 4mils - (2 mils per coat x 2 coats) Dry Film Thickness: Minimum - 4 mils Maximum - 6 mils Solids: 65% Food Contact: Compliant with USDA Incidental Food Contact Requirements * NOT RECOMMENDED TO USE WITH RAPID SET / CEMENT ALL Why choose a Solvent Based concrete sealer? Water based sealers are very time consuming and have complicated application processes resulting is most of your countertop sealer on the floor. They also tend to have varied success with adhesion and surface consistency. Solvent sealers are less temperamental, more predictable, more repairable, have better adhesion, and have a better resistance to chemicals. Solvent based 2k coating systems crosslink better than similar water based coating sys