Топ-10 конкурентов landybitz.com.au

roversnorth.com

save on parts & accessories for series, defender, discovery, lr3, & range rover. we’re dedicated to land rover & our experts have over 100 years of experience.

classiccarbs.com.au

Classic Carburettors

mm-4x4.com

Pair of Clear LED headlights to fit defender models from 1983 to present E MARKED AND DOT APPROVED! RHD & LHD UK and EU Spec. The installation process is quite simple and likely to take approx. 30min. per light unit. We would then recommend that you ensure the lights are pointing as per UK road regulations by visiting a garage or MOT station. This unit is also available to use throughout Europe. A H4 H13 plug is provided free of charge for easy connection. No wiring or changes required Lens : Hard Polycarbonate (PC) Shell Material : Die-casting Aluminium housing , Anodized, Laser Etched.  Beam Type: High Beam & Low Beam Our 7 inch head light is with a 3-prong plug, Hi/Lo beam can be selected by the switch on the vehicle. Product Name 7 inch LED headlamp (Pair) Model CZG-734A LED Chip Power CREE 40W per Unit – Total 80W Beam Type High Beam & Low Beam Color Temperature: White 6000k-6500k Luminous Flux 4,800lm Lift Span 50,000 hours Waterproof rate IP68 IP6K9K Material Aluminum housing & PC lens

lrdirect.com

the one-stop shop for genuine, oem & aftermarket parts for all land rover & range rover models. order worldwide in local currency with shipping calculated live.

famousfour.co.uk

Vehicle: Range Rover 1970-85 Spec: upto August 1982 Equivalent to Part No: 390570

darksidedevelopments.co.uk

Darkside Developments is a UK based diesel tuning company, specialising in VAG (VW, Audi, Seat and Skoda), BMW, MINI & Porsche Diesel Vehicles.

sp-4x4.com

British Made (By us here at SP 4x4) Hot Dipped Galvanised Swing away Spare Wheel Carrier To fit all Defender models 1983-2016 Will fit side opening half rear door LR516G (will not fit drop down tailgates) Take the stress off your door and hinges by fitting this heavy duty swing-away spare wheel carrier that puts the weight onto your chassis instead. Designed & Tested in house at SP, these are strong, reliable & will fit your Defender. Being hot dip galvanised these will not rust out & will stand the test of time. This swings with the door as you open the door. Unlike others where you need to swing the wheel carrier and then the door separately They will fit all Defender models from 1983-2016. This is made from heavy gauge steel tube with a quality second to none. The main plate, wheel mounting plate and hinges are all made from heavy duty 5mm Steel. The backing plate, which the piston mounts to is zinc plated and them powdercoated black as in the photo. This is to accommodate the new and improved piston mechanism. To ensure this part lasts for life, self lubricating nylon bushes are used within the hinge parts, not only making sure its swings with the door smoothly but to also make it last. Removing the problem of the unit rattling on the back door, nylon bushes with a steel sliding piston is used which is extremely tough, doesn't rattle and again has self lubricating properties. We have found this to be the most effective and reliable method of allowing the little bit of movement required for the carrier to slide when the door is opened and also to damp it when it is in the closed position. The full fitting kit is supplied included every nut and bolt you need to fit, full instructions are also included to aid a speedy fit. Please remember Hot Dipped Galvanised finish is an industrial process and it is normal to come with lumps bumps, rough parts etc. Its primary function is for longevity as these wlll last a lifetime. So doesnt look as pretty as a powdercoated fini

frontrunneroutfitters.com

Home Page - International - Dometic