21 Şubatiçin MKSLaser uygulama analizi

MKSLaser is an application used for mobile phones to interact with MKS DLC32. Before using this application, please make sure that the mobile phone and the engraving machine are in the same local area network. Enter the IP of the machine in the application or scan the engraving machine in the local area network. After the connection is successful, the machine can be operated (moving the stepper motor, switching the laser head) , Positioning, file transfer, engraving, monitoring engraving information, etc.). The connection button at the top left of the homepage can enter the IP address of the engraving machine or scan the engraving machine in the local area network. The upper display shows the current X/Y coordinates and laser intensity of the machine. There are four large buttons at the bottom to enter the corresponding submenu: 1. After click the "Creation" button a. The picture can be edited, and the picture source can be in several ways: graffiti on the mobile phone screen, taking pictures on the mobile phone, and selecting the picture on the mobile phone. b. After entering the editing picture, you can edit the picture with brightness, contrast and other effects. You can also configure the file name modification, picture size, engraving rate, laser power, etc. c. The engraving range can be patrolled on the mobile APP, that is, contour engraving. d. After finishing the parameter adjustment, you can slice and upload it to the engraving machine. After the engraving machine successfully receives it, you will enter the engraving page. 2. After click the "Control" button The engraving machine can be moved by a stepping motor, and different steps and moving speeds can be set; It can also return to zero stepper motor, position, unlock stepper motor, etc. 3. After click the "Material" button You can choose the built-in graphics materials for engraving 4. After click the "Graving" button The engraving machine returns to the file list of the TF card on the machine, and you can select a file to engrave