Top 10 borgeson.com Competitors

flamingriver.com

Flaming River - Classic Auto Parts - Vintage Automobile Steering Components - Steering Accessories - Electrical Components

unisteer.com

Love driving Your Mustang but hate the way it steers? Revitalize your classic mustang’s steering and handling with one of Unisteer’s early Mustang Rack & Pinion Kits! Eliminate that slop and constant steering correction. Our early Mustang Rack Kit greatly improves the steering and handling when compared to that old steering box. This is a center take-off style rack and pinion that utilizes an offset ball center bar which duplicates the stock center link; this means that the rack matches the exact geometry of the original front suspension. Effectively eliminating bump steer, and creating great handling. The rack comes mounted to a one piece mounting bracket which replaces the tubular cross member located directly behind the front suspension. Since the racks are center take-off style, we off set the rack on the mounting bracket; moving the pinions closer to the driver-side frame which makes connection of the steering linkage to a column as easy as possible. From a steering standpoint, we found that the early Mustangs split mid 1967 and there were slight differences, so make sure you order the correct kit! Additionally, later model Mustangs and Cougars may look the same, but are NOT - check out our Cougar Rack & Pinion Kits. The kit will work on Small Block cars, and have been successfully used with Stock Manifolds, and Hooker Super Comp Headers. Other Headers may work, but we can't guarantee an easy install. This kit requires the use of a mini starter. This kit may require some modifications on Mustangs with Dart Heads and other Aftermarket Heads requiring different headers. Note: If you have a 351C motor you will need to use Headman headers. Click to view instruction sheet Tech Info: Pinion Type/Size:  17mm DD Amount of Travel:  6" Turns Lock to Lock:  2.5 - 2.75 Turns Pressure Port Size:  18mm - 6 AN Return Port Size:  16mm - 8AN Pump Required:  Low Flow 1100 psi Inner End Threads:  11/16" - 18 Female Tubes Kit Includes: Rack and Pinion Mounting Bracket Moun

ididit.com

ididit has been making the finest quality steering columns and related accessories for the hot rod, and muscle car enthusiast.

ridetech.com

We have traveled the country weighing and recording data from thousands of vehicles. Use this data to help determine the correct spring rate for your vehicle.

classicperform.com

10/12 MS Bracket kit for Moser Pressed Bearing 11 inch rotor

redheadsteeringgears.com

Show your pride in the best steering gears on the planet with this RedHead Steering Gears logo full zip sweatshirt. Available in 3 sizes: Medium, Large & Extra Large.

epowersteering.com

Shipping Notes UPS Next Day and 2-Day are not guaranteed for all locations. We ship our packages according to UPS guidelines. Next Day Orders that are placed before 10am PST are dropped off at a UPS location before their

sweetmanufacturing.com

Learn about the history of Sweet Manufacturing and its founder to see where our expertise in automobile engineering and parts started.

affordablestreetrods.com

Quality Products at an Affordable Price!

mpipressure.com

mpi melt pressure is an expert in plastic melt pressure products. we provide the best performing, most cost-competitive melt pressure transducers, transmitters, and extruder rupture disks available. we are a customer needs-driven manufacturer, providing unparalleled technical support. contact us today to learn more.