JRR Cadillac CTS-V 2008-2014 MoTeC M150 PNP Kit This kit fits 2008-2014 Cadillac CTS-V LSA V8 vehicles, with manual or automatic transmission This full standalone kit includes the M150 ECU, JRR GM firmware and PNP harness. The M150 kit plugs right in to your CTS-V, replacing the OE E67 ECU, and includes a customized start up calibration Optional sensors and sub harness wiring can be added to the base kit, to customize for any application Full integration with OE dash display, ABS system, stability control, cruise control, body electronics OE traction control supported, and allows tuning of engine torque response to system requests. Alternately, the MoTeC motorsport traction control can be used, with driver adjustable slip targets, using the OE wheel speed sensor signals. Supports the OE 6L90 automatic transmission. Torque values and reduction can be tuned for optimum operation of transmission Engine torque control, allowing fine tuning of engine output to suit available traction, without relying solely on the traction control system Flex fuel control - adjust fuel, timing, boost, cold start and more based upon ethanol content Staged injection - supports two injectors per cylinder, including dual fuel systems. 2 stage nitrous control - various parameters supplied to control nitrous systems including bottle heater relay control based on nitrous pressure Integrated CO2/wastegate pressure control - controls a fill/bleed solenoid setup to control wastegate pressure Water injection control - with failsafe for boost/timing/fuel based on pressure sensor feedback Supports most common injectors, coils, sensors and actuators Supports direct input from a MoTeC/Racegrade CAN keypad On the CTS-V, the MoTeC is mounted in the engine bay like the OE ECU. Two grades of the M150 are available - standard and ruggedized/marine. For most applications, the standard grade is fine and can handle light water splashes/dust without a problem. For applications where there may be