Top 10 simplyspeakers.com Competitors

reconingspeakers.com

Family-owned since 1977, The Speaker Exchange® specializes in selling, repairing, and restoring speakers, including vintage components. With decades of experience, we are the go-to choice for professional speaker services and guaranteed satisfaction worldwide.

parts-express.com

When selecting a speaker driver, spec sheets can only get you so far; nothing replaces precision measurement.  This is why the DATS LA is a critical tool for any serious speaker builder.  With a built-in 100W amplifier, the DATS LA provides complete small and large T/S measurements in seconds, but it does much more than that.  Utilizing it’s patented DC-bias testing method, the DATS LA also reveals BL and KMS Symmetry in easy to read graphs, right in the software.  Other systems require careful calibration, training and a lot of time to test just a single driver.  The DATS LA will do all this in mere minutes.

speakerworks.com

speaker repair and speaker parts, woofers, tweeters, foam repair kits, custom speaker grill covers, and fabric. surrounds to refoam speaker edges.

madisoundspeakerstore.com

Scan-Speak 4.5" Illuminator Midrange 12MU/4731T-00- 120mm- 4 ohm   Low Q for relatively deep midrange response. The Illuminator woofers are in every aspect unusual designs with the open construction, the extremely long linear excursion and patented under-hung SD-3 (Symmetrical Drive) neodymium motor system, which due to copper caps and its construction ensures very low distortion, adding the unique patented cones, low-loss linear suspension the result is: ”The Very Best Money Can Buy”! The Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside airflow around the motor and with the very open cast aluminum chassis design the driver is virtually free from compression. The under-hung voice coil is precision wound with CCAW ribbon wire on a titanium bobbin for a low loss yet high power handling design. The vented pole piece has contoured openings to eliminate any hint of turbulence noise. The uniquely shaped top plate and open air frame ensure there is virtually no dynamic compression caused by restriction of the diaphragm back wave. Neodymium magnet Under hung motor system One piece cone and dust cap, full cone technology Very Wide Frequency Response 100-10KHz Patented Symmetrical Drive (SD-3) Low-loss Linear Suspension Foam surround High Output 90dB @ 2,83V Madisound recommends: a 2 liter sealed enclosure, loosely filled with wool or acousta-stuf. Your F3 in this enclosure is 185 to 200Hz, depending on the amount of stuffing.

thelordofbass.com

Cerwin Vega Surround Kits

reconekits.com

Behringer Original Replacement Diaphragm

crutchfield.com

since 1974 we've provided legendary service to consumer electronics shoppers. get free 2-day shipping, one-on-one advice, along with free lifetime tech support.

dedicatedaudio.com

Description Specifications AVAILABLE FOR PURCHASE IN-STORE ONLY. CALL 855-991-8181 Olympica Nova III is the ideal solution for someone who wants to experience the essence of Sonus faber. Slim and elegant, it offers a powerful and transparent sound at the same time. This model is capable of creating a sound stage that won’t go unnoticed and will make it unique. ESSENCE OF A BRAND Since 1983, many moments have marked the history of Sonus faber; the launch of the Olympica Collection 6 years ago is one of them. One of the first lines presented as a complete family of products, but above all, the very first one to feature original drivers, entirely designed in Sonus faber. Olympica Nova is the second generation of the iconic family of 2013, improved in its form and substance, imbued with the timeless values that inspired us in creating the original line. The result is a new Collection that embraces the most advanced technologies that already enhance our most prestigious creations. ORGANIC SHAPE The lack of flat and parallel walls improves enclosure performance and maintains the typical asymmetrical Lute shape of first generation Olympica. The asymmetrical shape of the cabinet is an original design concept that allows versatile positioning of the speakers to tune the bass response in any room. Inspired by nature, the lines follow the flow of a circular spiral motion, achieving a more organic cabinet structure. No longer just a functional element added to handle airflow, the reflex duct is now fully integrated into the cabinet, further improving the speed and transparency of sound. AVAILABLE FINISHES: WALNUT, WENGE SPECIFICATIONS: SYSTEM: 3 way, full para-aperiodic vented box “Stealth Ultraflex”, floorstanding loudspeaker system. TWEETER: H28 XTR3, Neodymium “cup design” motor system with DAD™, Ø 28 mm MIDRANGE: M15 XTR2-04, CCAW wire on a “eddy current free” voice coil, Ø 150 mm WOOFER: 2 x W18XTR2-08, Ø 180 mm CROSSOVER: 250 Hz - 2.500 Hz FREQUENCY RESPONSE: 32 Hz

repairyourspeakers.com

reparatie van uw luidsprekers, met 30 door audiofriends zelf ontworpen, originele, en andere foam en rubber randen. met 40 video's om u te helpen etc.

santonaudio.ca

Quick update from the condo party room @ 980 Broadview