Los 10 principales competidores de vengeanceracing.net

kore3.com

This KORE3 billet hub kit was designed for GM short-spindle applications, which includes all 1964-1972 GM A-Bodies, 1967-1969 GM F-Bodies, and 1968-1974 GM X-bodies. Please refer to the GM Big-Brake Application Chart for additional compatibility and application specific notes. KORE3 hubs are a clean, strong, lightweight solution for anybody wanting to run slip-on rotors on their GM short-spindle equipped car. Hubs were designed to complement the KORE3 big-brake conversion kits. Notes: Kit is provided with your choice of either M12x1.5 press-in or 1/2-20 screw-in studs and bearing races pressed in as standard. Billet aluminum grease caps come as standard with this hub kit. KORE3 billet hubs are interchangeable with most GM, OE, short-spindle drum hubs, however the OE drum hubs must be modified in order to be used with the KORE3 big-brake upgrade. The OD of the flange flange must be machined such that the face diameter in contact with the rotor is no greater than Ø5.69" or else it may interfere with the rotor and not allow it to seat properly, resulting in a potentially unsafe condition. KORE3 billet hubs with a C5/C6 rotor in place increase track width +.200" [+5mm] per side over stock drum applications, making the overall track width +.400" [+10mm] wider than stock. Track width is decreased -.240" [-6mm] per side compared to the stock disc applications, making the overall track width -.480" [-12.2mm] narrower than stock. The following items are included in this kit: Installation instructions (2) KORE3 Billet Hubs: GM Short-Spindle CNC machined 6061-T6511 billet aluminum Dual 5 x 4-3/4" wheel patterns 3.15 lb [1.43 kg] each Type III black anodized finish (1) Hardware kit (2) Inner Wheel Bearings (2) Outer Wheel Bearings (2) Inner Oil Seals (2) Grease Caps (10) 1/2"-20 screw-in wheel studs OR (10) M12x1.5 press-in wheel studs (2) Billet Aluminum Grease Caps

lingenfelter.com

After a year of intense development, rigorous testing, and proven validation, the Performance Design Carbon pTR Intake Manifold for C8 LT2 Corvettes is ready for the street as well as the track and available exclusively through Lingenfelter Performance Engineering.Producing an additional 25 horsepower at the rear wheels on average when used with the Lingenfelter 95 mm Throttle Body, the Performance Design Carbon pTR Intake Manifold takes stock C8 Corvettes to the next level with style and performance. It features a great-looking 5-layer carbon fiber upper and a durable heat-resistant glass-reinforced nylon lower while embracing lightweight tunnel ram architecture.Innovative engineering allows for complete ECM integration using the factory connectors, and there is no calibration required.The Performance Design Carbon pTR Intake Manifold is an all-inclusive, technically advanced system with absolutely everything, from the pressure tested Performance Design Carbon pTR Intake Manifold to the high-performance Lingenfelter 95 mm Throttle Body (if required). In addition, this advanced system includes the appropriate couplers, hoses, harnesses, gaskets, fasteners, and connectors which were specifically designed to work with the factory-installed connections and fittings on all C8 LT2 Corvettes.Performance Design Carbon pTR C8 Corvette Intake Manifold Engineered for 2020 and Later C8 LT2 Corvettes Additional 25* Horsepower to the Rear Wheels When Used with 95 mm Throttle Body Complete ECM Integration with Factory Connectors No Calibration Required Tested to Over 50 PSI Heat Resistant 5 Layer Carbon Fiber Plenum & Foam Core Flange Polymer Lower Runner Pack Resists Heat Soak Lightweight Glass Filled Nylon Lower Tunnel Ram Architecture Has Provisions for Port Injection Fuel Rails Available SEMA 2021 Global New Product Award WINNER! NOTE Additional power improvements when used in conjunction with Lingenfelter Corsa Exhaust. IMPORTANT Does not fit conv

corvettesalvage.com

Looking to decode a 2019 Corvette RPO (Regular Production Option) code? Check out the tables below. The following is a list of Regular Production Option | 2019, C7, code, Codes, Corvette, option, options, production, regular, RPO %

weaponx-c7.myshopify.com

weapon x motorsports is your source for performance, headers, exhaust, wheels, hood, aero mods & upgrades for your 2014+ chevrolet c7 corvette stingray and z06.

katechengines.com

Katech LT1, LT4 & LT5 High-Capacity Scavenge Dry Sump Oil Pump Your LT Engine’s Ultimate Weapon Take your LT engine’s oiling system to the next level with the Katech LT High-Capacity Scavenge Dry Sump Oil Pump. Engineered for maximum performance, this pump delivers up to 53.6% greater scavenge capacity and significantly increased oil pressure at critical RPM ranges. Single gear built from premium 4140 billet steel and designed to eliminate factory-powered metal gear. This pump is the ultimate solution for LT1, LT4, and LT5 dry sump engines. KEY FEATURES PRESSURE Modified pressure section for enhanced oiling performance. 25% increase in oil pressure at 6,000 RPM (LT engine testing). 45% increase in oil pressure at 3,000 RPM (LT engine testing). Maintains factory control solenoid function. SCAVENGE 53.6% greater scavenge capacity for improved oil return. Precision-machined 4140 billet steel single gear for durability. Eliminates factory powdered metal gear for superior strength. ADDITIONAL DETAILS No core required | Brand new pump. Compatible with factory cover or Katech billet VVT delete cover. May require calibration changes to disable high-performance oil pump DTC codes (HP Tuners, EFI Live, etc.). BENEFITS Increased oil pressure ensures better lubrication under high RPM and load. Enhanced scavenge capacity reduces oil pooling and aeration. Built for durability and reliability in high-performance applications. FITMENT | LT1, LT4 & LT5 Dry Sump Gen 5 Engines PART NUMBER | KAT-A7092 WHY CHOOSE KATECH? Katech's engineering expertise ensures maximum reliability and performance for high-demand applications. Our LT2 pump upgrade is ideal for enthusiasts and racers who demand consistent oil pressure under extreme conditions. WATCH IT IN ACTION

enginetech.com

Here Are Some Of Our Recent News Blog Posts To Stay Up To Date On All Things Enginetech. We Also Send Out A Monthly Newsletter To All Our Customers.

corvette7.com

just another camaro zl1 z28 ss lt camaro forums, news, blog, reviews, wallpapers, pricing - camaro5.com sites site

casperselectronics.com

Casper's Electronics, Inc