Топ-10 конкурентов codaevolution.com

brigandarms.com

Brigand Arms designs and develops modern carbon fiber handguards and accessories that improve your shooting performance.

smokecomposites.com

Smoke Composites makes advanced carbon fiber AR, PCC and 308 components. Free-floating hand guards, butt stocks, and more. Lightest in the industry.

lancer-systems.com

The Lancer Systems MSC is an innovative new product that offers you the option to modularly mount a suppressor cover on your Lancer Systems LCH5 Carbon Fiber Handguard, when choosing to run your rifle suppressed. You will also have the ability to quickly detach the MSC when needing to access the suppressor. The purpose of the MSC design is to create a shield around your rifle-mounted suppressor, to protect your suppressor from coming into contact with something that could damage your investment, and to primarily protect you from coming into contact with the dangerously hot suppressor following live-fire.

clarkcustomguns.com

This kit brings the power of the .44 magnum revolver to the 1911! Chambered in .460 Rowland™, Clark Custom Guns was the first to bring the .460 into the 1911 world with this kit.  All others, including the namesake, are imitators.  Fits Colt government models and clones (Non-ramped frames only!).  All barrels are made of chrome moly steel.  When purchasing Stainless steel, only the compensator is Stainless Steel.  The barrels are blued and machined on site and may require up to two weeks for delivery.  With a 98% straight drop-in rate you should have no problems with this kit.  If for any reason you cannot drop in the kit, send us your gun and kit and we will fit it for free, you pay only shipping. Not recommended for Filipino manufactured 1911's, other soft metal 1911's, or aluminum manufactured frames or slides. California & Connecticut residents must have their compensator “pinned & welded” to meet state regulations.  Please make the "Pin & Weld" selection under "CA, CT Residents" when ordering your kit. DUE TO NEW CA REGULATIONS ALL BARRELS SOLD TO THAT STATE MUST BE SENT TO AN FFL FOR TRANSFER. Call to order

aerospacearms.com

Our forged upper receivers are a great complement to our forged lower receivers with a MIL-Spec bore. The thermal fit inner dimension measures at .997 -0.0/+0.001" and requires the application of heat in order to provide a solid mate to the recommended barrel extension. By heat we mean more than Granny's hair dryer. Features and Specifications: Forged 7075-T6 Black Type III Hard Coat Anodized Finish For Use with M4 Barrel extensions Made in America on American-made machines

timbercreekoutdoorsinc.com

Description 0 Reviews The Timber Creek Lower Parts Kit Includes: TC Ambidextrous Saftey Selector TC AR Takedown Pins TC Magazine Release Button Mil-spec Bolt Catch, springs, and pins to complete build This Kit is the perfect start to any MSR build. CNC Machined out of aircraft grade billet aluminum. Available in 10 colors. All mounting Hardware included ***Warning Always perform a function check after installation Write a Review 0 Reviews Hide Reviews Show Reviews

bisontactical.com

Replacement Cheekpiece for Master Piece Arms Introducing the MPA Competition Cheekpiece for a Master Piece Arms chassis. This is a replacement cheek-piece, cheek rest or comb for the MPA chassis. The "New" variation now ships with a cheekpiece that does not have the longer, pointy ends. It is functionally identical and was done to simplify inventory across multiple models and to reduce filament waste. **NEW Material 2/28/2024** - Now with a smoother material The new material is ABS, and can be further chemically smoothed using Acetone.  For a DIY project you can research ABS Acetone chemical smoothing and using a fairly simple procedure achieve a high gloss finish.  Bison Tactical recommends the "Smoother" surface for this procedure. Installation Instructions for New Version Link Below is a picture showing the new versions of the MPA narrow cheekpiece.  These new ones do not use a mounting block, instead screws penetrate the cheekpiece and screw directly into the rods below them.  For Ultralight/Hybrid there are (2) rods.  For Matrix/Competition and others there are (2) rods and a center thumbscrew which uses a threaded larger rod that threads into the thumbwheel.  The "OLD STYLE" below is the mounting block for the wide curved aluminum cheekrest from the older versions of the MPA chassis (shown without the cheeckrest).  The version pictured uses the replacement mount for a quick release (typically used on a non-folder chassis).  The mounting block is the same for all the older MPA chassis. Old and new versions of MPA cheekpiece platforms. We have designed a new MPA Competition Cheekpiece to work with the new style chassis.  Pictured below is the configuration on a Competition Non-Folder. New Style MPA Competition Cheekpiece I personally like a more narrow cheek rest so I can keep my head more vertical and relaxed while having a more natural upright head position.  I couldn't find anything available so I designed one. Here

taccom3g.com

Even tho this grip tape is designed for the mossberg shockwave amd remington tac14, you can put this on anything really.

mountsplus.com

The Magpul SGA Stock is a tactical upgrade for Mossberg 500, 590, and 590A1 shotguns, featuring adjustable length of pull and recoil reduction.

xlrindustries.com

Description Specs Colors Top Accessories Notes/Lead Times Inlets Compact and lightweight rifle chassis system! The ATOM Magnesium is an ultralight modular rifle chassis designed for the firearms enthusiast or backcountry hunters seeking a compact ultralight chassis. The standalone chassis, without buttstock or grip, weighs only 14 oz for short actions and 15.5 ounces for long actions. When configured with a carbon fiber buttstock and carbon grip the system weight is just 27 oz. The all-new ATOM features the same built-in bubble level, and machined in RRS 1.5" dovetail (Arca-Swiss) in the forend as the Element 4.0 Magnesium. Machined from AZ61A Magnesium, the ATOM MG retains all the strength and durability for which XLR's rifle chassis systems are known, but at a fraction of the weight! This is the ultralight, modular chassis platform for the backcountry outdoorsman! A popular choice for those looking for a chassis system that can be configured for target shooting, hunting or competition. ** Expected extended lead time due to high product demand. Lead times are 6-10 week for all chassis orders. We appreciate your patience. ** ATOM MG Ultralight Chassis Specifications: Chassis Block: 14-16 ounces. Interested in different configuration weights? Check out our Calculator! Interested in different configuration dimensions? View Chassis Dimensions Material: Machined from solid AZ61A Magnesium. Arca-Swiss/RRS Railing: Integrated Arca-Swiss/RRS railing into the bottom forend. New Models have RRS Lock.  M-LOK Compatible: Yes, the ATOM chassis system is M-LOK compatible. Detachable Magazines: Yes, the ATOM chassis system comes standard with an integrated detachable box magazine system (Magazine sold separately). Magazine Type: The ATOM chassis system Utilizes AICS pattern magazines. Bedding Required: No, XLR's multi-point radial cut inlet eliminates the need for traditional Glass Bedding Accepts AR-style flat top grips and AR-style buttstock. XLR Rifle Chass