Top 10 monocure3d.com.au Competitors

liqcreate.com

liqcreate is a developing and manufacturing company for quality 3d-printing resins for sla, lcd, dlp and msla technologies. used in jewelry, dental, industrial.

ameralabs.com

Orthodontic, Wax-Up, Implant, Crown and Bridge Models

3d4makers.com

Facilan™ Ortho Filament Facilan™ Ortho is a high-performance 3D printing filament developed specifically for orthotics applications.  Facilan™ Ortho can also be used in soft braces, corrective braces, shoe soles and other similar applications. We've developed this material in concert with orthotics producers, orthotics fitters and people who wear orthotics in order to develop the perfect filament for 3D printing orthotics.  Facilan™ Ortho is a polyester that is semi-crystalline leading to a clean white final appearance. The density of Facilan™ Ortho is around 1.2kg/cm 3 and it has exceptional mechanical properties. Facilan™ Ortho melts around 60°C which makes it a safe thermoplastic to print. With a glass transition temperature of -60°C the product is extremely flexible and tough. Facilan™ Ortho is a high-quality biodegradable plastic based on a thermoplastic fulfilling compostability according to EN13432. The unique properties of Facilan™ mean that it has excellent adhesion to textiles. This means that 3D printed parts can be combined easily with or bonded to textile inserts, midsoles or other brace or shoe parts.  Due to the low melting point of Facilan™ Ortho, it can be re-shaped after 3D printing with 55 °C water. Facilan™ Ortho Material Properties Density: 1.1 g/cm³ Tensile Strength: 45 MPa Elongation at Yield: 15 % Tensile Modulus: 350 MPa IZOD Impact Strength (notched): 8 kJ/m2 Shore D Hardness: 46 Heat Deflection Temperature (0,45 MPa): 57 °C  Print Settings  Print Temperature: 130°C (130 to 170°C) Bed Temperature: 30-45°C Adhesion: Ultimaker Adhesion sheets, Avery Mailing labels L7567-25, PEI Sheets Print Speed: 10mm/s  (10 - 30 mm/s)  Mass flow: 120 % Fan Speed: 100% Note: Add M302 S120 into the beginning of the g-code to allow cold extrusion, below 170°C Extra: Minimum Layer Time considerably +/- 60 sec minimum, highly dependent of model size and complexity and enabled Lift Head. Support: If PVA or breakaway Support = enabled; Suppor

polymaker.com

polymaker is an international team passionate about 3d printing. we produce the very best 3d printing materials by controlling every stage of production.

ninjatek.com

If you have a 3D printing issue, challenge or question, the NinjaTek team of experts is here to help. Reach out to us.

resione.com

▌Q:All or part of the bottom layer of the prints cannot adhere to the build plate,what should we do? A:Click here to get the answer ▌Q:How to reduce the warpage and shrinkage of the prints? A:Click here to get the answer ▌Q:Difference between low viscosity and high viscosity resins A:Click here to get the answer ▌Q:Why

forward-am.com

Use the filter dropdowns to find the right printing workflow for your Forward AM resins!

elegoo.com

ELEGOO specializes in the research, development, and production of the most quality & affordable 3D printers, Arduino-based STEM & robotic kits, making technology easy-to-access for all the makers around the world.

makewithloop.com

turn 3D print waste into new, consistent filament.