Top 10 soundimports.eu Competitors

audiophonics.fr

Jantzen Audio MOX are high-quality film resistors. They provide high thermal and shock resistance.

parts-express.com

When selecting a speaker driver, spec sheets can only get you so far; nothing replaces precision measurement.  This is why the DATS LA is a critical tool for any serious speaker builder.  With a built-in 100W amplifier, the DATS LA provides complete small and large T/S measurements in seconds, but it does much more than that.  Utilizing it’s patented DC-bias testing method, the DATS LA also reveals BL and KMS Symmetry in easy to read graphs, right in the software.  Other systems require careful calibration, training and a lot of time to test just a single driver.  The DATS LA will do all this in mere minutes.

hifisound.de

fast delivery with competent helpdesk. loudspeaker diy since over 39 years. hifi and high end components at low prices.

lautsprechershop.de

der lautsprechershop mit über 500 verschiedenen bausätzen den wichtigsten lautsprechermarken einem riesigen angebot an bauteilen

madisoundspeakerstore.com

Scan-Speak 4.5" Illuminator Midrange 12MU/4731T-00- 120mm- 4 ohm   Low Q for relatively deep midrange response. The Illuminator woofers are in every aspect unusual designs with the open construction, the extremely long linear excursion and patented under-hung SD-3 (Symmetrical Drive) neodymium motor system, which due to copper caps and its construction ensures very low distortion, adding the unique patented cones, low-loss linear suspension the result is: ”The Very Best Money Can Buy”! The Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside airflow around the motor and with the very open cast aluminum chassis design the driver is virtually free from compression. The under-hung voice coil is precision wound with CCAW ribbon wire on a titanium bobbin for a low loss yet high power handling design. The vented pole piece has contoured openings to eliminate any hint of turbulence noise. The uniquely shaped top plate and open air frame ensure there is virtually no dynamic compression caused by restriction of the diaphragm back wave. Neodymium magnet Under hung motor system One piece cone and dust cap, full cone technology Very Wide Frequency Response 100-10KHz Patented Symmetrical Drive (SD-3) Low-loss Linear Suspension Foam surround High Output 90dB @ 2,83V Madisound recommends: a 2 liter sealed enclosure, loosely filled with wool or acousta-stuf. Your F3 in this enclosure is 185 to 200Hz, depending on the amount of stuffing.

sbacoustics.com

Vented reinforced plastic chassis, proprietary cone material with natural fibers made in-house, soft low damping rubber surround for improved transient response

daytonaudio.com

Quick Overview The Dayton Audio OmniMic 40k is a powerful and precise acoustic measurement system, perfect for optimizing audio systems at any level. Featuring a compact USB omnidirectional microphone with a 4 mm capsule, the OmniMic 40k delivers calibrated measurements from 5 Hz to 40,000 Hz with high fidelity and minimal variance, even off-axis. Its stainless steel construction ensures durability, while the included Photolink device allows accurate time-of-flight and phase measurements, essential for speaker design and system calibration. With capabilities including frequency response, SPL, harmonic distortion, and room acoustics analysis, along with intuitive software, the OmniMic 40k provides professionals and hobbyists with everything needed to design and refine audio systems. Product Highlights Accurate response from 5 to 40,000 Hz using the unique calibration files High dynamic range allows precise and distortion free measurements up to 145 dB Instantly calculates acoustic time of flight providing actual delay and true phase response Custom 4 mm capsule and small aperture enable omnidirectional performance up to 40 kHz Measures frequency response, true phase, distortion, SPL, loudspeaker compression, and much more Quick and easy setup, even beginners will be making precision measurements in minutes Rugged stainless steel microphone body and tip tolerates accidents and less than gentle handling Product Manuals / Spec Sheets / Downloads Dayton Audio OmniMic Software Dayton Audio OmniMic Test Tracks Dayton Audio OmniMic 40k User Manual Buying Options Buy on Parts Express Buy on Amazon Buy Internationally

boomaudio.de

4 x 100 Watt Endstufe mit ADAU1701 DSP und Bluetooth. Die Ausgänge lassen sich brücken, so dass neben dem 4 Kanalbetrieb auch 2.1 und 2.0 möglich ist. Über den digitalen I2S Ausgang lässt sich eine weitere Endstufe anschließen. Zum Programmieren des DSP's benötigen Sie die optional erhältlichen Programmer Wondom ICP1 oder ICP5, sowie der frei erhältlichen Software " SigmaStudio". Mit dem ICP5 Programmer ist auch ein Zugriff auf das Board mit dem PC User Interface MIUMAX möglich. Details: Audio: TDA749* Chipsatz Ausgangsleistung: 4.0: 4 x 100 Watt 2.1: 2 x 100 Watt + 1 x 200 Watt 2.0: 2 x 200 Watt Lautsprecherimpedanz: 4 - 8 Ohm, gebrückt min. Impedanz: 6 Ohm Kaskadierbar über den I2S Ausgang, bis zu 8 Kanäle sind möglich DSP: Analog Devices ADAU1701, voll programmierbar Audio Eingänge: Line-In, Bluetooth, I2S Audio Ausgänge: Lautsprecher, I2S Unterstütze Bluetooth Codecs: BT v5, apt-X HD, apt-X LL, SBC & AAC u.a. 4 GPIO Abgriffe für externe Potentiometer, etc. Power Management Schaltung, extrem geringer Stromverbrauch Audio Signal Erkennung Diverse Schutzschaltungen (Überspannung, Überhitzung...) Empfohlene Versorgungsspannung: 12 V DC - 39 V DC Hochwertige Bauteile Platinendicke: 2.5 mm Im Paket enthalten: Verstärkerplatine, Anschlusskabel (Stromversorgung, Lautsprecher)

wilmslowaudio.co.uk

Product description Compact and durable 0.56Ω, 20W ceramic resistor designed for speaker crossovers. Highlights Resistance tolerance of 5% for precise audio crossover control Designed to withstand temperatures from -55°C to 155°C Instant overload capacity with low noise figure Power handling film technology for improved performance Product details Jantzen Audio 002-0862 | 0,56 Ω | 20 W | 5% | Ceramic Resistor The Jantzen Audio 002-0862 ceramic resistor is a testament to high-quality crossover components, offering a perfect blend of durability and performance for OEM speaker production. With a resistance value of 0.56 ohms and a power rating of 20 watts, this resistor is built to deliver reliable performance. The 5% resistance tolerance ensures accurate control within audio crossover circuits. Its high temperature tolerance makes it suitable for a wide range of operating conditions, withstanding temperatures from -55°C to 155°C without compromising functionality. The completely insulated design is ideal for PCB crossover applications, maintaining integrity even under shock and humidity. The employment of power handling film technology over traditional winding cores not only enhances the resistor's power handling capability but also contributes to a decrease in resistance values for certain high-value models. This feature, coupled with the resistor's instant overload capacity and low noise figure, ensures minimal annual shift in resistance value, making the Jantzen Audio 002-0862 an exceptional choice for audio enthusiasts seeking quality and affordability in their crossover designs. Choose your value from the drop down box. Price per unit