Top 10 steam-brite.com Competitors

aramsco.com

HI-FLO MERV-8 Filters for DrizAir 1200, Dri-Eaz LGR7000 XLi, and Phoenix R125 / R150 / R175 / R200 / D385 Dehumidifiers These innovative new filters replace traditional pleated and OEM filters. They are made of 100 % polyester with 90% recycled content. These HI-FLO filters have 20% less air restriction then traditional MERV-8 pleated and OEM filters for better equipment performance, while boosting dust holding capacity to five times that of other filters. Designed specifically for dehumidifiers MERV-8 efficiency Made of 100% polyester material 20% less air restriction than traditional pleats Promotes top performance of your equipment Five times more dust and particle holding capacity than traditional pleated and OEM Filters Maintains a lower pressure drop for the life of the filter Dimensions: 12" x 12" x 1" Fits: DrizAir 1200, LGR7000 XLi, Phoenix R125, Phoenix R150, Phoenix R175, Phoenix R200, Phoenix D385Product Type: Pre-FilterSize: 12 in x 12 in x 1 inFor Use With: Light Green Color, DrizAir 1200, LGR7000 XLi, Phoenix R125, Phoenix R150, Phoenix R175, Phoenix R200, Phoenix D385Width: 12 inHeight: 1 inDepth: 12 inMedia Material: PolyesterMERV: 8.0Weight: 0.500

cleanprosupply.com

ResinForce Water Based Urethane Matte - 1.5 Gallon Kit (Mix 2:1) Two Component 6100 WB URETHANE MATTE SURFACE PREPARATION:The concrete surface must be deemed mechanically and structurally sound, thoroughly clean of debris and completely dry.  Concrete must be fully cured a minimum of 28 days.  Proper moisture testing should be performed prior to applying this product.  It is recommended to prepare the concrete surface by mechanical means such as shot blasting or diamond grinding with 30 grit or coarser diamonds to achieve a CSP-2 to CSP-3 profile.  Vacuum concrete surface several times, until dust is thoroughly removed.  If applying over an existing, fully bonded coating that is outside it's recommended re-coat window, the surface should be sanded thoroughly with a 60-120 grit sanding screen until the surface is completely dulled with scratches.  Clean dust thoroughly. Substrate, air and material temperatures must be no less than 50°F and not exceed 80°F.  If applied outside these limits, the coating may not achieve adequate film formation and may have excessive air entrapment, bubbles, blushing, or hazing.  Please note that higher substrate, air, and material temperatures as well as excessive humidity may speed the cure rate of this product.  Cooler temperatures and lower humidity may slow the cure rate of this product. MIXING:If mixing less than a full kit, mix Part A and Part B separately with a stir stick, low speed mixer or vigorously shake containers prior to measuring out the smaller kit to ensure uniform distribution of all ingredients.  In a clean mixing container, blend 2 Parts A and 1 Part B using a drill mixer for 2-3 minutes.  Up to 10% clean water may be added AFTER blending Parts A and B to help reduce roller marks, orange peel, etc.  Avoid creating a vortex in the material which could introduce air and/or moisture content t

michco.com

janitorial supplies and floor machine replacement parts for kent, advance, nilfisk, betco, minuteman, clarke, square scrub, proteam, mighty mac, deb sbs, sca, tork, and others.

4jtotalsupply.com

4J Total Supply is your source for commercial hose, pumps, sprayers, spray equipment, dehumidifiers, fleet products, commercial flood lights, light bars, and small engine parts. We now have three locations to serve you in Florida, Georgia, and Kentucky.

cleaningdepotstore.com

🧽 How to Choose the Best Portable Extractor for YOUR Carpet Cleaning Needs Are you searching for a portable carpet extractor or carpet cleaning machine and feeling overwhelmed by conflicting advice? You’re not alone. Unfortunately, many sales reps will push the machines they have in stock without ever asking about your specific cleaning needs. That’s not helpful—it’s just a sales pitch. At Cleaning Depot, we believe the right machine is the one that fits your actual workflow, not what’s easiest for us to sell. Before investing in any carpet cleaning equipment, consider the following essential questions to find the perfect fit: ✅ 1. Residential or Commercial Focus? Do you mainly clean residential homes, or are you focused on large-scale commercial accounts? Residential machines are often lighter, more maneuverable, and easier to fit in tighter spaces. Commercial machines usually have larger tanks, higher pressure options, and are built to run longer and harder. ✅ 2. Carpet vs. Tile: What’s the Mix? Do you do mostly carpet cleaning, more tile & grout, or an even 50/50 split? For tile and grout, look for extractors capable of at least 700–1200 PSI. For carpet only, a lower PSI range (200–500) is often sufficient. ✅ 3. How Much PSI Do You Actually Need? For hard surface cleaning, a higher PSI (up to 1200) is ideal to blast soil from grout lines. For carpet, PSI in the 200–500 range gives solid results without oversaturation. ✅ 4. Heat: Need It or Not? Some cleaners require built-in heaters for deep carpet cleaning, while others are fine using hot tap water or inline heaters.If you clean greasy commercial carpet or want maximum soil breakdown, built-in heat might be worth it. ✅ 5. Hose Run Distance? Will you run 25 feet or stretch out 100+ feet of hose from your machine? Long hose runs need higher CFM (airflow) and stronger lift to maintain performance. For short runs, most standard extractors will do just fine. ✅ 6. Cleaning Tools: Wand or

camspray.com

This pickup-mount cold water power washer with  Recoil Start Honda engine is designed to be placed in the box of a heavy duty pickup capable of hauling up to 3000 lbs. on the bed if filling the tank full. Features include a Honda® industrial gas powered engine and triplex plunger pump with ceramic plungers and stainless steel valves is equipped with low pressure chemical injection and system is protected by unloader valve and secondary pressure pop off. The frame is industrial coated channel and plate steel. Heavy duty trigger gun and wand allows for user to switch from high pressure cleaning to detergent application and is equipped with quick change 0°,15°,25° and 40° and detergent nozzles. <br /> THIS PRODUCT CANNOT SHIP TO CALIFORNIA

floorscrubberusa.com

Floor Scrubber USA delivers the best Floor Scrubbers, including ride-on floor scrubber, battery-powered floor scrubber, self-propelled floor scrubber, hand-push floor scrubber, cordless and corded floor scrubber. Based in California, Floor Scrubber USA is dedicated to selling high-quality Floor Scrubbers at the best price, and delivering it to you fast.

southernsweepers.com

MinuteMan industrial sweepers and scrubbers built for durability and uptime. Sales, rentals and local service support to keep your equipment productive.

safetysourcellc.com

the safety source llc is an mro supplier, and your home for safety supplies, commercial led lighting, janitorial supplies, office supplies, food service supplies and industrial supplies.