9月8日 的 PyNav - NMEA & Pypilot Remote 應用程式分析

🧭 NMEA NAVIGATION CENTER + PYPILOT REMOTE CONTROL Two use cases: 🔹 Have a pypilot autopilot? Control it AND display all your NMEA instruments on tablet. 🔹 No pypilot? Use PyNav as a standalone NMEA navigation center. ───────────────────────────────────── ⚓ FREE — Pypilot Autopilot Control ───────────────────────────────────── • Engage / disengage autopilot • Mode selection: compass, wind, GPS, true wind, nav • Current heading + target heading input • Rudder angle indicator • IMU data: pitch, roll, heel, rate of turn • Full PID gain tuning (P, I, D, DD, PR, FF, WG, Deadzone) • Compass & rudder calibration, tack parameters • Pilot profiles (basic, wind, gps, simple, rate, absolute) • Servo stats: amp-hours, voltage, temperatures, runtime • Direct WiFi to Raspberry Pi hotspot — no router needed ⚠️ Free version: pypilot data only, no external NMEA display. ───────────────────────────────────── 💎 PRO — Full Navigation Center 🎉 Launch price: €8.99 → Regular: €12.99 ✅ One-time purchase — No subscription ───────────────────────────────────── Works WITH or WITHOUT pypilot. Requires a NMEA/WiFi module + Android device. Optimized for 10"+ tablets, works on smaller screens too. ⊞ DASHBOARD 6 drag-and-drop panels: wind rose, navigation, autopilot, depth (color-coded), pressure with 3h trend, engine RPM. 🌬 WIND Wind rose + history graph. AWA, AWS, TWA, TWS. 🔧 ENGINE INSTRUMENTS RPM, coolant temp, oil pressure/temp, battery & alternator voltage, engine hours, fuel flow, exhaust temp, gear ratio (F/N/R), transmission oil. Tank gauges: port/starboard fuel, fresh water, grey & black water. Custom graphs: any parameter vs RPM or time. ◎ NAVIGATION Heading rose, SOG, COG, STW, lat/lon, waypoint navigation (BTW, DTW, XTE port/starboard). 🔔 ALARMS ON ALL NMEA DATA Navigation: depth, speed, heading, pressure, wind (AWS/AWA/TWS/TWA) Engine: RPM, temps, pressures, voltages, fuel levels Autopilot: rudder angle, servo voltage, controller temp → Audio + vibration + on-screen banner ───────────────────────────────────── 🔧 REQUIREMENTS ───────────────────────────────────── FREE: Pypilot installation (Raspberry Pi) + Android 6.0+ PRO: Any NMEA/WiFi module + Android 6.0+ (Yacht Devices, Quark-elec, Digital Yacht, Hat Labs, Actisense...) Pypilot optional for PRO. ───────────────────────────────────── ⚠️ SAFETY ───────────────────────────────────── PyNav does not replace regulatory equipment. Skipper remains SOLELY RESPONSIBLE for navigation. Permanent watch at sea is MANDATORY. Pypilot is a DIY open-source project provided "as-is". 🔒 100% local — no data sent to external servers. No ads.