8月16日的EOB PT-WIFI应用程序分析

With the EOB PT-WiFi application, your heating is still under control. Set the temperature or the entire weekly program, configure the entire system and control multiple thermostats from one application. Control options: 1) The application is connected to the thermostat via a WiFi network or data via the ELEKTROBOCK server and you can conveniently control and program the thermostat from anywhere. 2) The application is connected to the thermostat via a local WiFi network and you can conveniently control and program the thermostat anywhere in range of your network (if you own a public IP address, you can access the thermostat even outside the local network). 3) The application is connected to the thermostat via the AP- access point thermostat and you can conveniently control and program the thermostat anywhere in range of this network. 4) The application allows connection with a thermostat even via a USB cable (for PC version only). 5) In the event of a WiFi fault, the thermostat can also be controlled manually. Other benefits and features of the application: - choice of system configuration via WiFi or via USB (PC only) - adding users to control one thermostat - multiple thermostats can be controlled from one application - Display the current room temperature wherever you are - Changing the required temperature - Setting up to 7 week programs - 2 additional programs for even/ odd week mode - AUTO / MANU mode selection - Pre-heating function - Choice of three regulation types (Hysteresis / PI / PID ) - summer mode - Permanently off-off mode - holiday function - Key lock with code - Boiler maintenance - temperature correction - Setting the temperature range - service mode with code - Test the correct connection - Device reset option (Service mode only) More information at http://www.elektrobock.cz/termostat-s-wifi-modulem/p1731