Capacity Info: Battery Health app analytics for January 12

Do you want to know the remaining battery capacity of your smartphone or tablet, or have you bought a new battery and want to check its capacity? Then this app is for you! Capacity Info will help you to know the remaining battery capacity or to know the actual capacity of a new battery. Also with this application you can find out the capacity in Wh, the number of charge cycles, the temperature and voltage of the battery, find out the charging/discharging current, receive notifications when the battery is low (the charge level is adjustable), when the battery is charged to a certain charge level, when the battery is full charged (Status "Charged"). Also with the help of this application you can receive notifications of overheating/overcooling of the battery, and also with the help of this application you can find out the limit of the charging current (not everywhere it is possible to get data on the limit of the charging current). It is also possible to display values in an overlay and much more. P.S This application consumes very little background power. Therefore, using this application, you will not notice the loss of autonomy. Application Open Source, for those who are interested, here is the source code, study if you want: https://github.com/Ph03niX-X/CapacityInfo Application features: • Battery Wear; • Residual capacity; • Added capacity during charging; • Current capacity; • Charge level (%); • Charging status; • Charging/discharging current; • Maximum, average and minimum charge/discharge current; • Fast Charge: Yes (Watt)/No; • Battery temperature; • Maximum, average and minimum battery temperature; • Battery voltage; • Number of cycles; • Number of charges; • Battery status; • Last charge time; • Battery technology; • History of full charges; • [Premium] Notification of full charge, certain level (%) of charge, certain level (%) of discharge, overheating and overcooling; • [Premium] Overlay; • [Premium] Capacity in Wh; • [Premium] Charge/Discharge current in Watt; • And much more Explanation of required permissions: • On top of all windows - needed for an overlay; • Launch after boot - needed for the application to start itself after loading the OS Attention! Before leaving a review or asking a question, read the instructions and follow them, as well as read the FAQ, there are answers to many questions. If you have any suggestions for improving the application or you have found any bug or error, write to the E-Mail: Ph03niX-X@outlook.com or Telegram: @Ph03niX_X or open an Issue on GitHub