Top 10 thingpulse.com Wettbewerber

esp32.com

espressif esp32 official forum

docs.espressif.com

Amazon Qualified Device ESP-WROVER-KIT is an AWS-qualified development board. In addition to Espressif’s own ESP-IDF SDK, you can use FreeRTOS on ESP-WROVER-KIT-VB. FreeRTOS provides out-of-the-box connectivity with AWS IoT, AWS Greengrass, and other AWS services.

esphome.io

Frequently asked questions in ESPHome.

microcontrollertips.com

giving engineers useful information on developing microcontroller-based designs and programming embedded systems

shop.blues.com

The Blues Starter Kit contains everything you need to start building connected solutions with Notecard and Notehub. Start with Swan (an STM32-based host MCU), slot it into Notecarrier F (the Blues development board), and use Notecard (with LTE Cat-1 Cellular or WiFi) to build your connected app. Kit Contents Notecard Cell+WiFi (Global LTE Cat-1 and 2.4 GHz WiFi) Notecarrier F Swan Flexible dual Cellular and GPS antenna Key Notecard Cell+WiFi Specs Includes a secure element with a factory-installed ECC P-384 certificate, provisioned at chip manufacture. Integrated GPS and accelerometer. Designed to operate on battery power, be "always-on" to maintain time and location, while typically drawing less than 8µA@5V, when idle. Bundled with 10 years of service and 500MB of cellular data. No cellular subscriptions, SIM fees, or monthly minimums apply. PTCRB Certified Module. Notecard Cell+WiFi included in the kit is designed to be used globally and uses a Telit LE910C1-WWXD modem that connects to LTE Cat-1 / WCDMA / GSM networks. See the Notecard Cell+WiFi product page and the Notecard Cell+WiFi datasheet for additional details. Notecarrier F is a companion development board designed for rapid prototyping with Adafruit Feather-based host microcontrollers. It can be used with any Feather-compatible device and includes Qwiic ports for connecting I2C peripherals. See the Notecarrier F product page and the Notecarrier F datasheet for additional details. Swan is a low-cost, embeddable STM32L4-based microcontroller designed to accelerate the development and deployment of battery-powered IoT solutions. It is especially useful for applications requiring a large amount of memory or a high degree of I/O expandability at an affordable cost, such as edge inferencing or remote monitoring. See the Swan product page and the Swan datasheet for additional details. The flexible dual Cellular and GPS antenna has a supported frequency range of 698 MHz to 4.0 GHz with a u.FL terminato

quickspot.io

Walter is a 4G/5G ESP32-S3 module with WiFi, Bluetooth, NB-IoT, LTE-M and GPS in an ultra small form factor. The CE, FCC, IC, RCM and UKCA certification allows you to create IoT products easily, without high certification costs and a short time to market.

upesy.com

Tutoriel pour apprendre à utiliser le PWM de la Raspberry Pi Pico avec Micro Python.

wolfssl.com

Does your device or application need FIPS or DO-178 based TLS or Cryptography?

trenz-electronic.de

Der Vorgänger dieses Artikels ist TEI0009-02-055-8CA. Alle Änderungen befinden sich in der Product Change Notification (PCN). Das Cyclone®10 LP Reference Kit ist das weltweit erste Entwicklungsboard mit einem 55kLE Intel Cyclone 10 LP und einer Vielzahl von Schnittstellen für zahlreiche Anwendungen. Das Board ist umfassend geprüft und einsatzbereit für Endprodukte und kann auch in kundenspezifischen Varianten genau nach Ihren Anforderungen bestellt werden. Das Referenzdesign ist mit einer KOSTENLOSEN Evaluierungsversion der kostengünstigen, kommerziell erprobten, hochleistungsfähigen Speicher-Controller-IP von Synaptic Laboratories Ltd (SLL) gebündelt. Diese kostenlose IP-Evaluierungslizenz läuft nie ab, und es ist keine Kundenregistrierung oder NIC-ID erforderlich. Klicken Sie hier, um die neuesten kostenlosen Testversionen der Speicher-Controller-IP von SLL für HyperBus, OctaBus, Xccela Bus, JEDEC xSPI Profile 1.0 und JEDEC xSPI Profile 2.0 für Intel, Microchip und AMD/Xilinx FPGA zu finden. SLL IP ist auch für die Verwendung mit Trenz Electronic HS CRUVI-fähigen Boards qualifiziert. Bitte senden Sie alle Vertriebsanfragen und Fragen zum technischen Support für SLLs IP an info@synaptic-labs.com. Eigenschaften SoC/FPGA Device: Altera ® Cyclone 10 LP FPGA 10CL055YU484I7G Speedgrade: 8 Temperaturbereich: Industrial Logic Elements: 55 kLE Package: 484-Pin UBGA RAM/Speicher 32 MB SDRAM 2 MB serial Flash Speicher 8 MB HyperRAM 16 MB user Quad-SPI Flash Speicher 2x 2Kb EEPROM (MAC-Address) On Board Integrierter USB Programmer 2 (JTAG + UART) 8-Channel, 12-Bit, konfigurierbar ADC/DAC mit On-Chip Reference Status LEDs, Power LED 13 x user LEDs 1 x 7-Segment Display 2 x Reset Buttons 5 x user Buttons Schnittstelle Arduino kompatible pin headers 6 x Pmod kompatible pin headers 1 x Grove connector 1 x D-SUB connector for VGA 2 x SMA connectors (nicht bestückt) 2 x Fast Ethernet PHY (10/100 MBit/s) Power 5V via Power Jack Größe 9,5 x 11 cm Andere Bestückungsva