Les 10 concurrents boatdesign.net les plus visités

thehulltruth.com

thehulltruth is the premier boating and fishing forum on the web!

cruisersforum.com

cruisers forum is an online forum community of cruisers from around the world!

forums.ybw.com

I have the Dutch version from PC Nautic and after initially not being able to work I received 2 resistors to fit on the ev100 head unit now they said to which wires to attach them but not what you attach the other end of the resistor to, I’m no good at electronics. Does the resistor connect to...

sailinganarchy.com

Be sure to visit our page for help with scammers after you place your ad!

practical-sailor.com

Since 1974, Practical Sailor’s independent testing has taken the guesswork out of boat and gear buying.

yachtworld.com

barcos en venta, nuevos y de ocasión ofrecidos por brókers, incluyendo veleros y barcos a motor en yachtworld.es.

clcboats.com

Below you'll find answers to common questions, but if you need anything else, just reach out – we're always happy to help.

duckworks.com

Canoe Sail 36 sq ft (3.34 sq m) We are happy to announce the introduction of a modest sailing canoe sail. It is also suitable for small children's sailing dinghies about 8ft long - see more information below. Typically kids sailing dinghies have around 35 to 40 square feet of sail. The production sail has only a single reef unlike this early trial sail from a couple of years ago. The photos are the same sized sail made by my friend Paul Helbert on prototype Quick Canoe being sailed by me at Mt Storm Reservoir in Virginia USA. The new RSS made sail is quality white dacron and has one reef only, but these photos should give an estimate of the size and how it looks. It will fit many boats including the drop in sailing canoe rig from Storer boat plans. It has a reef that will take it down to 23 sq ft which is the same size as the original smaller sail for the drop in rig. It uses the same yard and boom length as that simple sailing rig. Fitting the 36sq ft sail to other boats and canoes. Mast Diameter - We recommend for canoes where the crew might sit on the side of the boat to sail that the mast cross section be around 50mm (2") round or 45mm (1 3/4") square with rounded corners. The round dimensions will work for round wooden masts, including hollow birdsmouth mast construction or for an aluminium section with about a 2mm (.08") wall. For a boat which will be sailed sitting inside the boat I would recommend a mast slightly smaller. You can deduct 6mm or 1/4" from the mast diameter. Mast Length - The mast needs to extend be about 2560 above the deck or sheerline of the boat, but will need to be longer to reach the bottom of the boat. Other Spars and Centre of Effort or balance of the boat This is a sail diagram to give the measurements for the yard and boom. It also gives enough information for people to work out if the CE (centre of effort) will be in the right place for their centreboard or leeboard position. As a balance lug - For a boat without