Les 10 concurrents havel-composites.com les plus visités

topepoxy.eu

Strojní broušení epoxidové pryskyřice je nejrychlejší cesta k dokonale rovnému a hladkému povrchu u větších ploch, jako jsou říční stoly, desky a.

exelcomposites.com

Explore sustainability in composites at Exel: lifecycle thinking, circularity and partnerships to reduce environmental impact, improve transparency and develop lower‑footprint solutions.

acpcomposites.com

The PRO-SET INF-211 Medium Infusion Hardener when mixed with PRO-SET Resins will help give you a medium amount of working time for your project. This has a pot life of 131 minutes at 72°F, working time of 3 to 4 hours at 77°F, and will gel in about 8 hours at 77°F.

airborne.com

Last Monday, the new Forze IX of the Forze Hydrogen Racing team drove its first metres on the so-called superbattery at the Circuit of Zandvoort. With this milestone achieved, the next step is to integrate the hydrogen system into the car. The hydrogen racing car has a top speed of 300 kilometres per hour and will compete

valleycomposites.com

C-Tek / Resin Composites

compositeenvisions.com

RDR-2250 High Temperature Laminating Resin – AluminumRDR-2250 is a clear, rigid high temperature laminating epoxy resin from Premium Resin Tech, designed for tooling and structural composite laminates that must withstand elevated service temperatures. This system cures at room temperature and, with proper post-cure, delivers excellent heat resistance and dimensional stability for repeated use in demanding manufacturing environments.Formulated for use with Premium Resin Tech high temperature hardeners, RDR-2250 provides smooth wet-out on fiberglass, carbon fiber, and other reinforcements while maintaining high gloss and strong mechanical properties. It is recommended for high temperature laminating up to 325 °F when fully post-cured according to the Technical Data Sheet.Key FeaturesHigh temperature capable: room-temperature cure with post-cure for maximum thermal performance up to 325 °F (HDT depends on hardener).Rigid, dimensionally stable matrix suitable for tooling, fixtures, and high-temperature composite parts.Excellent wet-out and adhesion on fiberglass, carbon, and other common reinforcement fabrics.Clear laminating resin that helps reveal fabric details and detect dry spots or voids during layup.Designed for repeated use in manufacturing environments where tools see multiple heat cycles.Engineered & manufactured in the USA for consistent, high-quality performance.Compatible Hardeners (Sold Separately)RDH-9234 Room Temperature / High Temperature Hardener – pot life ~165 minutes at 72 °F and heat distortion temperature around 320 °F.RDH-9106 High Temperature Slow Cure Hardener – pot life ~90 minutes at 72 °F and heat distortion temperature around 300 °F.Available Package Sizes10 lbs50 lbs (approx. 5 gallons)Sold by weight: all containers are sold in pounds to ensure accurate metering and mix ratios (8 lbs ≈ 1 gallon as a general reference).Mixing & UseMix only with RDH-9234 or RDH-9106 hardeners at the specified ratio by weight (see product TDS).Bring resin and

smicomposites.com

We’re quick to conquer a challenge and just as excited to design with you. If you’d like to speak with us about your next project, visit the web page!

epoxio.cz

Rubio Monocoat Oil Plus 2C je kvalitní a ekologický olejový nátěr na dřevo v interiéru, který dokáže barevně natónovat a ochránit povrch pouze jednou vrstvou. Používá se na dřevěné podlahy, nábytek, hračky atd., ale i na renovaci dřevěných povrchů.

sanax.cz

Kontaktní informace, Kontakty

shop.chemex.cz

Polyesterová předurychlená laminační pryskyřice se sníženým obsahem styrenu.