Resistor Plus analisi dell'app per 24 dicembre

Resistor Color Code Calculator helps you determine resistor values in ohms and their tolerance based on color-coded bands. Follow these steps: - Tap and select resistor color values from the color codes: black, brown, red, orange, yellow, green, blue, violet, gray, and white. - Select the resistor band. - Tap the resistor band and choose the color value. - The result is displayed immediately after setting the color value. - The result can be copied. - Take a screenshot of the resistor for future reference. Resistor Parameters: Band Digit Black - 0 Brown - 1 Red - 2 Orange - 3 Yellow - 4 Green - 5 Blue - 6 Violet - 7 Grey - 8 White - 9 Band Multiplier Black × 1 Ω Brown × 10 Ω Red × 100 Ω Orange × 1 kΩ Yellow × 10 kΩ Green × 100 kΩ Blue × 1 MΩ Violet × 10 MΩ Gold × 0.1 Ω Silver × 0.01 Ω Band Tolerance Brown - 1% Red - 2% Gold - 5% Silver - 10% A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses. A resistor opposes the flow of electrical current; the higher the value of the resistor, the more it opposes the current flow. Values are given in ohms. Thank you for your support! Visit nitrio.com for more apps for your iOS devices.