GRESCharge analisi dell'app per 12 gennaio

The main functions of the product are as follows: 1) Modify the default login password of the charging pile. After clicking on the Bluetooth name of the charging pile in the App, it will jump to the login page. After successful login, if it is the default password, you can choose to modify the password or continue to use the default password; 2) Set the time of the charging pile. Synchronize and set the time of the charging pile with the phone time. 3) Connect the charging pile to WiFi. Click on the WiFi list to connect to the available WiFi and enter the password to send down the connection. 4) Add RFID card. Scan or enter the card number of the charging card for binding operation; Click on "Add Card Through Pile" to send down the command and add the card by swiping at the charging pile side. 5) Configure OCPP server. Input or select OCPP server parameters and perform sending down configuration operation. 6) Configure APN. Input or select APN server parameters and perform sending down configuration operation. 7) About charging pile. You can view product model, serial number, manufacturer, rated power, rated current and phase number. 8) Firmware upgrade. Perform control board and power board upgrades. 9) Factory reset. Perform factory reset operation. 10)Local DLM parameters Set load balancing related parameters. 11)show Charger Status 12)static IP set 13)orderly charging params set