CaravanWatch - Levelling のアプリ分析 12月29日

Description:- This is similar to other surface bubble level apps but has 2 unique. Firstly it can speak the amount in Degrees, Dimensions or Blocks your Caravan is out of level front-to-rear & side-to-side, then confirm when it’s level in all directions. This information can be viewed on an Apple Watch as well as the iPhone or iPad. Secondly it can have a customised offset when you intentionally need something with a small slope angle & this offset is remembered. If your iDevice has a cover or protruding camera these are also compensated for & doesn't require calibrating or the Internet. CaravanWatch is aimed primarily for Caravan & Motorhome. It has an option to use the built-in speech feature so app “says” where on the Vehicle it's low & by how much, then finally when it's all level. If you have chosen to use sounds or better still speech, then with your iDevice volume loud enough & the Caravan door open you can hear where & how much it needs raising in Degrees, Dimensions or Blocks from outside. Most useful of all is if you have a wireless Bluetooth Earbud (which are not too expensive) or wireless Bluetooth Headphones, you can hear as you walk around the outside making adjustments the amount Vehicle is low. Basic method of use:- 1/ The first time only, level your Caravan or Motorhome as normal. 2/ Place iDevice on firm flat surface anywhere convenient, even places at a strange angle, like a Motorhome dashboard. 3/ Set-up CaravanWatch & main screen will go pale blue. 4/ In the future whenever you arrive at a new site, just place iDevice in same location as before & using information on CaravanWatch to adjust your Vehicle until screen turns pale blue again. Short Cuts:- Swipe Gestures:- To temporarily toggle sounds or speech On or Off just swipe horizontally either from Left to Right or Right to Left or touch the speaker button top right. Double Tap Gestures:- There is a simple compass feature that just points ‘South’ as an aid to positioning your Caravan, Motorhome or awning towards the sun. This is also useful for users with solar panels so they don’t park in the shadow of trees. To display the yellow arrow just double tap with one finger in the main screen & to discard it, double tap again. NOTE:- Unfortunately this feature is not available on the iPod. CaravanWatch doesn't need calibrating or the Internet. All of these customisable settings are remembered. The one important thing to remember is always place the iDevice on a firm flat surface & make sure ‘Home’ button is facing the same direction when it was customised. It ‘does’ matter which direction iDevice faces to make levelling process dependable. So make ‘Home’ button face either Front, Back, Left or Right in the Vehicle, then you can rotate the image of the Caravan or Motorhome in ‘Settings’ screen. To add the desired small slope angle offset press the ‘Custom Offset’ button ‘Reset’ so it changes to Green & then click the ‘Back’ button top left. You can also change the default Sensitivity / Tolerance of CaravanWatch using the + or - buttons, the smaller the value the nearer your Vehicle will be to what you prefer (the default is 0.5° but less is better, we use 0.10°). Compatibility:- Caravan Watch is Universal & compatible with all iPad’s & iPhone’s from iPhone 4S to latest iPhones, Pro’s and Pro Max’s. The Apple Watch feature can only be used when paired with an iPhone. Requires iPhone iOS 12 and watchOS 8.5 or later to connect to an Apple Watch and iPadOS 12 or later on the iPad