Kelvin Thermostat のアプリ分析 12月9日

Kelvin thermostat is a mobile application designed for remote control and monitoring of Kelvin WIFI thermostats. Thermostats can be easily added to application by setting thermostat into “Connect to cloud” mode. Thermostat will show two three digit PIN codes, which are entered into application in “Add thermostat”. WIFI network selection and password entering is done in application. During thermostat installation phase, settings can be copied from earlier thermostat to make installation process faster. Multiple thermostats can be controlled from the application. Thermostats can be grouped into zones enabling common setpoint & mode selection for several thermostats. Thermostat can be also placed into custom control mode to override zone settings. Application offers fast switching between Home, Away and Schedule modes, additionally Anti-frost and Power regulation modes are available. Weekly Schedule can be easily programmed with application. Application will show the used temperature setpoint and measured room or floor temperature depending on the selected operation mode for thermostat. Application offers full control to all thermostat parameters in advanced settings menu. Temperature and Energy consumption trends can be easily monitored with application. Energy consumption can be shown from one or multiple thermostats. Temperature alarm limits can be configured for room and floor sensor. Alarms will be available even when application is closed as push notifications.