Electro-Harmonix1月 2026のための市場シェア分析

POWER JACK Current draw: 100mA at 9.0VDC. REC/PLAY/DUB (RPD) LED Red Lights red when either recording a new loop or overdubbing onto an established loop. If the MEM LED is off while RPD is red, it means the 360+ is recording a new loop, if MEM is lit, it is overdubbing. Green Lights green when playing back a loop. LOOP LVL Controls the loop output volume. LOOP Indented knob selects loops 1-11. MEM LED Lights solid orange when the currently selected bank contains audio; MEM does not light when the loop bank is empty. While turning the LOOP knob through the loop banks, MEM flashes quickly after transitioning from one loop to the next. DRY LVL Controls output volume of the input signal, which remains analog from Input to Output. OVERDUB Only active in overdub mode, this knob adjusts volume of previously recorded loop audio while overdubbing. The OVERDUB knob progressively reduces the volume of older loop layers, much like a feedback control on a delay. At maximum, previous loop audio levels remain at full volume during overdub. At minimum, the loop audio plays once before it is erased. You can use the 360+ as a long echo delay while in overdub mode by setting OVERDUB to the middle of its range. INPUT JACK Impedance: 2.2MΩ, Max In: +1.5 dBu. OUTPUT JACK Impedance: 680Ω, Max Out: +2.1 dBu. FOOTSWITCH Press for loop record, play, overdub. Hold for undo, redo, and erase.