venomcarbon.comの競合サイトトップ10

compositeenvisions.com

PRO‑SET® HTP 180 High‑Temp Infusion Epoxy (RESIN ONLY)PRO‑SET® HTP 180 is a high‑temperature epoxy infusion resin designed for advanced composite manufacturing using resin infusion and VARTM processes. It is formulated for high‑performance synthetic composite parts and tooling where elevated temperature resistance, excellent laminate quality, and stable cosmetic finish are required.HTP 180 is used with PRO‑SET® HTP‑280 hardener to create a high‑temperature infusion system with excellent flow, controlled working time, and strong cured mechanical properties. When properly post‑cured, the system can achieve a glass transition temperature (Tg) up to 300°F (149°C).Its controlled mixed viscosity and long working time support thorough fiber wet‑out and reliable flow through complex reinforcements and core materials.Key FeaturesHigh‑temperature infusion epoxy systemDesigned specifically for resin infusion and VARTM processingUsed with HTP‑280 hardenerExcellent thermal stability and high post‑cure TgLow mixed viscosity for efficient flow and wet‑outProduces strong laminates with excellent surface cosmeticsSuitable for structural composite parts and toolingHandling & Processing Highlights (at 72°F / 22°C)Mixed viscosity ~600 cPResin viscosity ~2,500 cPHardener viscosity ~35 cPPot life options approximately 120–180 minutes depending on hardener speedCure NotesElevated temperature cure required for full high‑temp performanceRoom temperature initial cure followed by staged post‑cure recommendedNot intended for open‑mold wet layup applicationsTypical ApplicationsHigh‑temperature composite toolingAerospace and motorsport composite partsInfused carbon fiber structural componentsHigh‑performance sandwich panels and laminates