OBD Tracker - ELM327 Terminal vs TakeoffAlert Uso e estatísticas

The ELM module(s) supported are network to serial interfaces that use wifi to communicate. This app communicates with an ELM OBDII (OBD2) car interface device. The Ultimate Step-by Step Guide: ◆ Get the right OBD 2 reader or scan tool, whichever suits your car. This is done by checking on the compatibility and the relevant tool. ◆ Locating where the OBD 2 port is. ◆ Powering the car engine on for the case ease of making the system work. ◆ Plug in the pins of the OBD2 connector to the areas of relevance within the OBD 2 port. ◆ Enable the OBD 2 to start reading. ◆ Open app, click "SCAN" - and select correct OBD2 device in list. (default is 192.168.0.10 / 192.168.0.123) You have any questions or concerns? Feel free to contact us. We're always here to help.

Apple App Store
Pagos
Turismo

Ranking da Loja

- -

TakeoffAlert

What is TakeoffAlert? TakeoffAlert is advanced takeoff monitoring app that monitors your takeoff performance through the takeoff event. This data is displayed to the pilot an easy to understand and intuitive format providing value feedback on their aircraft's ACTUAL takeoff performance versus the takeoff planned performance. How does TakeoffAlert work? Simple. 1. Enter your takeoff data: Runway Takeoff Distance Available (TODA); Takeoff Roll; Stopping Distance (see User Guide); Review and Execute the data. 2. When in takeoff position tap the "In Takeoff Position" button to begin monitoring the takeoff. That's it! TakeoffAlert begins monitoring your takeoff, providing realtime feedback about the aircraft is in relation to the runway and the calculated takeoff roll and stop requirements. *** DEVICE REQUIREMENTS *** Wifi ONLY iPads require an EXTERNAL GPS** connected to the iPad (such as Bad Elf Pro). iPod Touch requires an EXTERNAL GPS** connected to the iPod Touch (such as Bad Elf Pro). ** Appareo Stratus 1/2/3 and uAvionix Sentry GPS NOT Supported.