Top 10 claytonoffroad.com Competitors

teraflex.com

teraflex

rockkrawler.com

rock krawler suspension and accessories - jeep, bronco, superduty and ram lift kits

metalcloak.com

Jeep did an fantastic job designing the JL... but for some reason they, once again, missed a critical point on the rear seat; if you have a 4-Door JL Wrangler Unlimited, you are going to want the MetalCloak Center Seat Support.

synergymfg.com

Synergy Manufacturing, Inc. is an industry innovator producing premium off-road suspension and steering systems for Jeep, Ford, and RAM trucks.

genright.com

Product Description Reviews The GenRight coil over shock mount kit for the Front or Rear of a Jeep TJ, LJ, YJ or CJ (Toyota, Suzuki, etc.) that is made in the popular "hoop" style which pushes the upper shock mount all the way up just under the hood. This will also allow you to run super long travel shocks and maintain a reasonable ride height and proper shock mounting for the best possible performance. Our kit is designed to work with 2" or 2.5" diameter coil overs (of any brand) but also works with 2.5" coil over shocks in 12", 14" or 16" travel. This builders kit is the most universal on the market and can be cut and mounted in any position to best work with your particular Jeep's Engine & Suspension combination. Additionally, the compact hoop size is ideal for fitting inside the inner fender well, inside the engine compartment with just a small hole up through the top of the fender well for the shock to poke up through to the upper mount. This is a great option when pushing your front axle forward (about 2+") to get to the Magic 100" wheelbase! For the TJ or LJ guys, this kit allows you to cut off and remove all the factory upper spring mount/bump stop bucket from the frame. This is perfect for placing the shock in virtually the optimal position for dampening performance and articulation. For you CJ or YJ guys who are not ready to convert the entire front end over to coil overs, this can also be a great way to upgrade just the upper shock mount and convert over to shock "hoops" from the ugly stock mounts and install longer travel shocks and still keep the leaf springs. This kit is made from heavy duty 1-1/2" diameter x .120" thick wall steel tubing and includes a removable crossbar to connect the two shock towers (over the engine) for maximum strength. This kit or the parts from this kit can also be modified and used on the rear for those guys looking to put coil overs on the rear. Includes: (2) Shock Hoops (4) Shock Hoop Frame Gussets (4) Shock Hoop At

skyjacker.com

Since 1974, Skyjacker has led off-road suspension with innovative products, trusted quality, and three generations committed to performance.

rustysoffroad.com

Rusty's Off-Road is a leader in the 4X4 industry with our innovative line of Jeep specific products. Our in-house manufacturing and R & D keeps our products on the cutting edge. With our in house manufacturing we are able to control cost and sell retail at wholesale cost without sacrificing quality.

ironrockoffroad.com

   ROCK LINK PRO Benefits Improves ride quality Improves off road capability Wheelbase stretch ability NO exhaust modification NO gas tank relocation Works from 1 to 6.5" lift Reduces stress on suspension components and the Jeep in it's entirety, including the passengers ROCK-LINK PRO Features Front and Rear long arms Lower arms are 2"x5/16" wall D.O.M. - Thickest on the market All 1/4" steel bracketry - CNC laser cut and formed Huge 1.25" thread adjusting male ends with 3" of useable adjustment, that's far more than any competitor. No jam nuts Combination of flex joints and rubber bushings in control arms for flex and comfort Fully adjustable caster/pinion angles Bolt in design Made in the USA! Lifetime Warranty Product Fitment Notes Requires removal of factory control arm mounts in the front and rear Requires drilling Front -  Detailed Installation Instructions Rear -  Detailed Installation Instructions Born from the long lineage of the IRO long arm tradition. Look no further for the highest performing bolt-on long arm upgrade. Experience your Jeep refined. It's a Jeep, but that doesn't mean it has to ride like a lumber wagon. The Rock-Link delivers an instant seat of the pants improvement in ride quality. But that's not all! Out on the trail, the improvement in ride quality translates to a more enjoyable off road experience. The longer arms in this system link your axle to the frame at a much lower operating angle than short arms at the same lift height. By decreasing that angle and increasing the length of the arms, the impact of the terrain is more easily absorbed by the suspension. These improvements over short arms greatly reduce the transmission of shock loads though the frame causing discomfort in the driver's seat, and reduces accelerated wear and stress on other suspension components. Longer arms allow for huge articulation over larger obstacles while keeping the axle centered in the fender openings. This articulation keeps your t

rockjock4x4.com

RockJock's Johnny Joint Tool is designed to make assembly and disassembly of our 2 in. Johnny Joint rod ends simple!For Johnny Joint rebuilds and repairs, this tool can be used either in a bench vise, or it is compact enough that it may also be used for on-the-vehicle jobs, on or off the trail!Components consist of a CNC machined heat treated steel body, 3/8 in.-16 all-thread, and premium thrust bearings. Tool Fits: 2 in. Narrow Body Johnny Joints – All Styles 2 in. Standard Body Johnny Joints – All Styles 2 in. Machined Johnny Joints (that press into axle housings) – All Styles Tool Includes: (1)  Complete 2 in. Johnny Joint Tool Assembly Tool Features: Easily assembles and disassembles Johnny Joints CNC Machined Heat Treated Steel Components Flats machined on the base for ease of locking the tool into a vice Washer that retains all components for storage Notes: This tool will NOT work with these balls: CE-91122-11, CE-91122-12, CE-91122-13, CE-91122-14. This tool will work on all 2 in. Johnny Joint bodies (forged or weld-on), but we have no control over how they were installed into a vehicle. You may find that you have a Johnny Joint on an axle housing that the tool will not come close to fitting onto. In these instances, the only solution is to modify the tool, as shown in the second photo in the photo gallery of this product. Media Hub Installation Instruction Manual:  CE-9112T Watch how-to video on tool usage here

barnes4wd.com

Suspension accessories are for the customer who wants to build a suspension unique to themselves. From bracketry to total DIY kits. We have something to take your rig to the next level.  3 Link and 4 Link Brackets and TabsBarnes control arm brackets come at the standard 50k tensile strength and our custom 100 k tensile