Together with OK Auto we put two JK Wrangler Unlimiteds on the dyno at G&S Autoworks in Oxford, NJ to test the results of the performance products we were installing. The products involved int the test are the Unichip Performance Module and Airaid Cold Air Intake. The Test Nick and Rob from G&S Autoworks parked the Jeeps up on the dyno and conducted the runs. In the below sections we are posting the actual results from the dyno. We have some theories and observations regarding the test results in the conclusion section below. Recapping - each test was in 3rd gear, 2500-5500 RPM. First Up - OK Auto Rubokon Stock Configuration - Best of 3 runs HP Torque 166.2 @ 4750 200.0 @ 4250 Unichip set to setting 0 installed - Best of 3 runs HP & Gain/Loss Over Base Torque & Gain/Loss Over Base 165.5 @ 5000 (-.7 HP) 197.7 @ 4250 (-2.3) Unichip set to setting 1 - Best of 3 runs HP & Gain/Loss Over Base Torque & Gain/Loss Over Base 168.0 @ 5000 (+1.8 HP) 200.3 @ 4250 (+.3 run with Unichip double-click for larger size close Up double-click for larger size Next - jeepfan.com JK Stock Configuration - Best of 3 runs HP Torque 160.4 @ 4750 188.6 @ 4250 Unichip set to setting 0 installed - Best of 3 runs HP & Gain/Loss Over Base Torque & Gain/Loss Over Base 160.2 @ 5000 (-.2 HP) 189.3 @ 3500 (+.7) Unichip set to setting 0 and Airaid installed - Best of 3 runs HP & Gain/Loss Over Base Torque & Gain/Loss Over Base 165.7 @ 5000 (+5.3 HP) 193.6 @ 3750 (+5) Unichip set to setting 1 and Airaid Installed - Best of 3 runs HP & Gain/Loss Over Base Torque & Gain/Loss Over Base 168.3 @ 4750 (+7.9 HP) 198.7 @ 3500 (+10.1) Final Run with Unichip & Airaid double-click for larger size 2nd Run with Unichip & Airaid double-click for larger size Results Both Jeeps resulted in insignificant gains in HP and torque from the Unichip. The Airaid did provide results through all tests. Neither product provided results according to the manufac