Got a flat tire? It happens to all of us sooner or later. Luckily, repairing or replacing an inner tube is one of the most common bicycle maintenance tasks, and it’s easier than you might think. Whether you spotted the flat at home or got stuck mid-ride, this step-by-step guide will walk you through the whole process. With a few supplies and a little patience, you’ll be back on the road in no time. These steps work for more than just bikes—you can use them to fix a flat on a scooter or tricycle, too. Ready? Let’s dive in! What you'll need An adjustable wrench (if your bicycle does not have quick-release wheels) Tire levers A tube patch kit, or replacement tube A bicycle air pump Overview: Remove the wheel from the bike. Remove the deflated tube. Find the cause of the flat. Repair or replace the tube. Place the tube and tire onto the wheel. Reinstall the wheel. Remove the wheel from the bike. Taking the wheel off is your first step. The process looks a little different depending on which wheel has the flat and what type of bike you have. Front wheels usually slide out easily, but rear wheels and hub-drive electric bikes can take a little more work. We’ve broken down all the steps in our wheel removal guide so you can follow the process for your bike. Remove the deflated tube. Deflate the tube completely. Remove the valve cap and press down on the center pin to release the air. Removing the tire can be a little tricky, but tire levers make this step much easier and are included in many bike repair kits. Locate the valve stem, and start on the opposite side of the tire so you don’t damage it. Wedge the flat side of the tire lever between the rim and tire. Pry the bead (edge of the tire) up and over the rim, then hook the lever onto one of the spokes to hold it in place. Use a second tire lever to repeat the process a few spokes away. Once a section of tire bead is free, continue sliding the second lever around the tire to unseat the rest of