Top 10 trailerparts.com Competitors

trailerpartsunlimited.com

Carter Brand 7.2K–8K Hybrid Trailer Axle Hub / Drum – Complete Assembly Direct Replacement for Dexter 7,200 lb & 8,000 lb Hybrid “New Style” Axles – 5/8" Studs – Fully Loaded This is the Carter Brand complete hub and drum assembly built to fully interchange with Dexter 7,200 lb and 8,000 lb Hybrid “New Style” trailer axles using 5/8" studs and oil bath or grease lubrication. Designed specifically for Dexter-style axles using 12-1/4” x 2-1/2” drum brakes. This unit comes COMPLETE and ready to install. Works With: Electric or hydraulic drum brake assemblies Oil bath or grease hub applications 16” and 17.5” single tire and wheel setups  Complete Assembly Includes 5/8" wheel studs installed Inner and outer races installed 25580 inner bearing 02475 outer bearing 10-63 oil/grease seal (010-063-00) Oil or grease cap 8 lug nuts of your choice No chasing parts. No extra orders. Everything you need in one box.  Internal Specifications Inner Bearing: 25580 (1.750" ID) Outer Bearing: 02475 (1.250" ID) Inner Race: 25520 (installed) Outer Race: 02420 (installed) Oil Seal: 10-63 / 010-063-00 Seal ID: 2.250" Seal OD: 3.376"  Main Specifications Construction: Cast iron Finish: Black painted Drum Size: 12-1/4" diameter x 2-1/2" wide Hub Pilot Diameter: 4.75" Bolt Pattern: 8 on 6.5" Stud Size: 5/8" Axle Rating: 7,200 lb & 8,000 lb Hybrid “New Style” This Carter hub is built to match Dexter hybrid axle specs exactly — same dimensions, same bearing setup, same brake size — without the inflated OEM price.  

thetrailerpartsoutlet.com

At The Trailer Parts Outlet, you can find trailer axles, tires, wheels, and everything else your business needs. Visit us today to start shopping!

dexteraxle.com

dexter is a trusted brand serving the utility trailer, recreational vehicle, marine, agricultural, and specialty markets.

southwestwheel.com

southwest wheel® is a distributor of steel truck wheels, trailer parts, trailer axles, hitches, brake controllers, and more. catering to all major texas cities such as dallas, lubbock, houston, austin, san antonio, corpus christi, midland, and waco, and ship nation wide.

sturdybuiltonline.com

GreaseCo SuperPurpose Calcium Sulfonate Wheel Bearing Grease 14 oz Tube

store.felling.com

Shop our variety of quality trailer brake parts & assemblies, including brake pads, hydraulic hoses, calipers, full assemblies & more. Find the parts you need!

brakes4trailers.com

Electric Brakes, Hydraulic Brakes, Disc Brakes, and everything else trailer brake related, ready to ship same day!

haulktrailerparts.com

Explore a wide range of high-quality parts designed to keep your trucks and trailers road-ready. Browse our inventory and get the parts with fast shipping and reliable service

boattrailerparts.com

This 12 inch Vertical Galvanized Bunk Bracket allows you to vertically mount a (2)- 6 Foot Boat Trailer Bunk Board Runner Pre-Carpeted 2 in x 4 in or 2 x 6 bunk board. These vertical bunk brackets are very common on flat bottom john boats and skiff boats. They would also be adequate for V-Hull Boats. Typically a single axle trailer would have 4 of these mounted to hold up the boat. The 1/2 inch adjustable slotted holes allow for you to fix the height of your bunks to get the right ride height for your boat. If you are needing a different height we also have available the 10 inch Vertical Bunk Bracket Galvanized and 8 inch Vertical Bunk Bracket Galvanized Ideally, you would use either Boat Trailer Bolts or Boat Trailer U-Bolts to mount these bunk brackets around your boat trailers cross-members. The cross-members are the the pieces of either galvanized channel, tubing, or aluminum tubing that connect one side of the trailer frame to the other, typically in front, and behind the trailers axle or axles. In some cases with a tandem axle trailer, there may be 3 cross-members. When mounting this 12 inch Vertical Galvanized Bunk Bracket, mount the flat side to the face of the cross-member, and the open side will face away from the cross-member. Important things to consider when replacing Vertical Bunk Brackets. 1. Desired Bunk Board Height- Do you want the same size or would you prefer a shorter, or taller height for your boat. If you are going shorter keep in mind the changing ride height of the boat puts it closer to the trailer fenders and also the motor closer to the ground. 2. Keep Track of Hardware needed to replace the bunks. These bunk brackets will mount with either 1/2 inch bolts or U-Bolts. Determine which is needed, and the appropriate measurement. Most commonly, U-Bolts fastened around the trailers cross-member, and through the slotted holes. Determine the dimension needed to go around the cross-member by measuring the height and width. Keep in mind to add ext

uboltsdirect.com

Whether you're ready to order, or just have a few questions before getting started, our team at Uboltsdirect.com is happy to answer your inquiry.