A high quality floor mounted barre system Our aluminum floor mounted systems are made of heavy guage materials and top not craftsmanship. Aluminum barres are easily cleaned so as to provide a nice clean working surface. Specifications Barres are 1-1/2" diameter Aluminum (.100" wall thickness) and are powder coated a Satin Silver color. Floor stanchions are made of heavy gauge steel and feature a powder coated finish and have an added support brace on the back for additional strength needed in barre fitness. Baseplate to top of barre height is available in your choice of 36”, 39” or 42”. Stanchion baseplate is 6” x 6” and has (4) 1/2" diameter holes, so you will need to use 3/8" diameter anchors. The distance from the rear edge of the floor stanchion to the front of the barre is approximately 7"  Barres supports 150 lbs. per linear foot of static weight when properly installed. Installation Longer length barre systems over 8' ship in multiple barre sections. The number of brackets required depends on the length of the barre. Barres are joined together inside the stanchion collars for a continuous length look. Our stock systems are configured for our recommended 4’ floor stanchion spacing. In some cases, bringing the end stanchions in a few inches to allow for some barre overhang may cause the stanchion spacing to be less than 4’ on each end. You may need to purchase a longer barre system. Floor stanchions may be placed anywhere along the barre length; however, a stanchion is required wherever barres are joined. Hardware for mounting into the floor is not provided as it will depend entirely on your floor type and what your installer feels will mount most securely. Hardware may be purchased at a local hardware or home improvement store. When barres meet in a corner take 1’ off each barre dimension so barres do not touch in the corner. Wood screws are provided for use underneath each bracket collar to secure the ba