Top 10 mauripro.com Wettbewerber

defender.com

defender marine offers boat supplies, inflatable boats and outboard motors from top manufacturers. all your boat supplies and boating needs, including marine electronics, sailing hardware, plumbing, ventilation, epoxies, boat paints. knowledgeable staff and fast shipping.

harken.com

Sails, Shape, Size and Design How do I select the right furling system for my boat?The Ordering Furling Guide explains how to choose a furling unit and accessories for your boat. You will need to know the clevis pin diameter as well as your headstay length and diameter. What are the differences between Harken's MKIV and MKIV Ocean furlers?Both are designed for longevity and ease of use, but the MKIV has additional features that make it more suitable for performance cruising and racing.   MKIV MKIV Ocean Foils Aerodynamic foil profile. Double grooves for faster hoists, douses, and sail changes. Single groove, round profile for easy rolling.Pass headstay wire and marine eye through foils. Cut top foil to fit. Bottom foil adjusts to fine-tune unit length. Halyard and Tack Swivels Independent swivels for improved sail shape. Fixed swivel. Drum Split drum removes for racing. One-piece fixed drum, spool, and guard. Line  Line is included. Line is not included. Are all Harken jib Reefing and furling systems capable of reefing a headsail?Yes, as long as the furling system has aluminum extrusions covering the headstay.Can I change sails with my Harken jib reefing and furling system?Yes, changing headsails is simple. Just attach the head and tack to their shackles, pass the luff tape through the prefeeder and feeder, and hoist. The feeders smooth out wrinkles and minor twists in the sail so you can easily raise sail while at the mast or in the cockpit. Choose the optional snap shackles if you plan to make a lot of sail changes. How can I reduce heel and get better control with a reefed sail?Harken's MKIV Jib reefing and furling units solve the inefficient shape of reefed sails with independent head and tack swivels. The independent swivels allow the middle to furl first, flattening the sail and reducing heel.For the best results, use a sail designed specifically for reefing with your MKIV furler. Reefing sails should be designed to have good shape from about

westmarine.com

shop the official west marine store to find over 100,000 products in stock for boating, sailing, fishing, or paddling. since 1968, west marine has grown to over 250 local stores, with knowledgeable associates happy to assist. shop with confidence - get free shipping to home or stores + price match guarantee!

lewmar.com

Lewmar Motor Mounting Bracket for Shallow Water Anchors No Drill Installation Allows for Mounting Directly to Engine Bracket Compatible with Lewmar Axis and Vector Available in Black or White

ronstan.com

Product InformationConvenient track mounting slugs are available for fitting standard profile track to the luff groove of existing masts.

sailboatdata.com

SailboatData.com contains information on over 8900 production and semi-production sailboats dating back to the late 1800’s.

bluemarinestore.com

Bluetooth smart battery voltage and temperature sensor for Victron MPPT Solar Chargers. Simple to install, the Smart Battery Sense features an adhesive backing and simple ring terminals for connection to the battery. Temperature sensing improves charging efficiency and avoids over or under charging therefore prolonging battery life. By measuring voltage at the battery bank terminals, errors arising from voltage loss due to cable resistance are avoided.  The information transmitted can be used simultaneously by multiple solar regulators. The Smart Network is easily set up using the Victron Connect app. Available for Apple and Android smartphones, tablets, PC & MAC.See the Victron Energy website for details. https://www.victronenergy.com/panel-systems-remote-monitoring/victronconnect Available in two versions: Short range for transmission up to 3 metres Long range for transmission up to 10 meters

sailingchandlery.com

Rooster Pro Grip - Brushed EVA Deck Tape Rooster self adhesive grip tape for use on your dinghy deck or racks. This brushed EVA "pro grip" tape moulds to fit the surface applied to providing a strong connection and durable grip. When you want to remove it, it's easy and clean and does not leave any residue when peeled off. Available in a number of colours. Rooster Pro-Grip Tape Properties Thickness 2.5 mm Width 100 mm Length 2 m Colour Various - see drop down list box Rooster Pro Grip Fitting Instructions If required, remove the old EVA tape, warm the tape with a hot air gun on a very low setting just to warm the tape and this will help soften the glue. Pull off the old tape Clean down the area to the taped with acetone (wear gloves please) very thoroughly.  You must remove any old glue/ silicones /wax /contaminants from the surface Cut the tape to length required that is going to be applied to the sitting out area / gunwale area Radius (say 10-15mm) the corners of the cut tape, to reduce the possibility of the tape lifting in the corners etc Repeat step 2 again to be sure all is clean on the surface Warm up the area that is going to have the tape applied Apply the tape and pull the backing paper off while applying pressure to the tape Rub down well to ensure good adhesion

shop-us.seldenmast.com

Seldén’s sail cars ensure smooth hoisting, reefing, and lowering of your mainsail. Designed for use with Seldén mast tracks and full-batten systems, these low-friction cars improve sail handling under load. Ideal for cruisers and racers seeking durability, reliability, and precise control at the mast.  Learn more about Seldén Sailmaking Hardware