CNC Lathe Simulator Classic のアプリ分析 10月6日

CNC Lathe Simulator Classic brings back the ORIGINAL classic flat-bed lathe model — the machine many of you learned on and asked us to return — now rebuilt with 7 interface languages. Write real G-code, set up the machine, tools and workpiece, and watch your program run on a full 3D lathe — with zero risk of crashing a real machine. THE CLASSIC FLAT-BED LATHE • The original horizontal-bed lathe model with the classic control panel • Swing-away protective frame, front tool post and tailstock • The familiar machine that made this simulator a shop-floor favorite IDEAL FOR • Students of CNC machining and manufacturing technology • Trainee operators and programmers preparing for shop-floor work • Engineers checking toolpath logic before real machining • Anyone who wants to understand how a lathe works REALISTIC MACHINE SIMULATION • Free camera: move, rotate and zoom around the machine (5 camera positions) • Cutting sounds and step-by-step (block-by-block) program execution • Machined surface visualization on the workpiece TRUE-TO-LIFE SETUP • Workpiece parameters: length, diameter, clamped length, end allowance • Coordinate systems: machine, workpiece and programmable zero points G54–G59 • Metric/inch units, per-rev and per-minute feed • 184-tool catalog: turning, facing, boring, grooving, threading, drilling G-CODE PROGRAMMING • Built-in program editor with line auto-numbering and code reference • Standard G-codes: positioning, linear/circular interpolation (I/K and R), U/W incremental, canned cycles G70–G76, thread cutting G32/G34/G76, cutter radius compensation G40–G42, constant surface speed G96/G97, spindle and coolant commands • Subroutines M97/M98/M99 • Program check reports errors in plain language • Toolpaths rendered directly on the 3D model SUPPORTS 7 LANGUAGES English, 中文, Русский, Français, Español, ไทย, Tiếng Việt Looking for the slant-bed lathe? Check out CNC Lathe Simulator — our newer edition with the modern machine.