steam-brite.comの競合サイトトップ10

aramsco.com

HI-FLO MERV-8 Filters for DrizAir 1200, Dri-Eaz LGR7000 XLi, and Phoenix R125 / R150 / R175 / R200 / D385 Dehumidifiers These innovative new filters replace traditional pleated and OEM filters. They are made of 100 % polyester with 90% recycled content. These HI-FLO filters have 20% less air restriction then traditional MERV-8 pleated and OEM filters for better equipment performance, while boosting dust holding capacity to five times that of other filters. Designed specifically for dehumidifiers MERV-8 efficiency Made of 100% polyester material 20% less air restriction than traditional pleats Promotes top performance of your equipment Five times more dust and particle holding capacity than traditional pleated and OEM Filters Maintains a lower pressure drop for the life of the filter Dimensions: 12" x 12" x 1" Fits: DrizAir 1200, LGR7000 XLi, Phoenix R125, Phoenix R150, Phoenix R175, Phoenix R200, Phoenix D385Product Type: Pre-FilterSize: 12 in x 12 in x 1 inFor Use With: Light Green Color, DrizAir 1200, LGR7000 XLi, Phoenix R125, Phoenix R150, Phoenix R175, Phoenix R200, Phoenix D385Width: 12 inHeight: 1 inDepth: 12 inMedia Material: PolyesterMERV: 8.0Weight: 0.500

cleanprosupply.com

ResinForce Water Based Urethane Matte - 1.5 Gallon Kit (Mix 2:1) Two Component 6100 WB URETHANE MATTE SURFACE PREPARATION:The concrete surface must be deemed mechanically and structurally sound, thoroughly clean of debris and completely dry.  Concrete must be fully cured a minimum of 28 days.  Proper moisture testing should be performed prior to applying this product.  It is recommended to prepare the concrete surface by mechanical means such as shot blasting or diamond grinding with 30 grit or coarser diamonds to achieve a CSP-2 to CSP-3 profile.  Vacuum concrete surface several times, until dust is thoroughly removed.  If applying over an existing, fully bonded coating that is outside it's recommended re-coat window, the surface should be sanded thoroughly with a 60-120 grit sanding screen until the surface is completely dulled with scratches.  Clean dust thoroughly. Substrate, air and material temperatures must be no less than 50°F and not exceed 80°F.  If applied outside these limits, the coating may not achieve adequate film formation and may have excessive air entrapment, bubbles, blushing, or hazing.  Please note that higher substrate, air, and material temperatures as well as excessive humidity may speed the cure rate of this product.  Cooler temperatures and lower humidity may slow the cure rate of this product. MIXING:If mixing less than a full kit, mix Part A and Part B separately with a stir stick, low speed mixer or vigorously shake containers prior to measuring out the smaller kit to ensure uniform distribution of all ingredients.  In a clean mixing container, blend 2 Parts A and 1 Part B using a drill mixer for 2-3 minutes.  Up to 10% clean water may be added AFTER blending Parts A and B to help reduce roller marks, orange peel, etc.  Avoid creating a vortex in the material which could introduce air and/or moisture content t

michco.com

janitorial supplies and floor machine replacement parts for kent, advance, nilfisk, betco, minuteman, clarke, square scrub, proteam, mighty mac, deb sbs, sca, tork, and others.

camspray.com

Cam Spray Trailer mounted cold water pressure washers are the toughest in the industry and are right at home in the roughest of applications. Features include an industrial Honda® gas powered engine and triplex plunger pump with ceramic plungers and stainless steel valves is equipped with low pressure chemical injection and system is protected by unloader valve and secondary pressure pop off. The trailer is road ready and is equipped with tail lights, turn signals 3500# axle and 15" wheels. Equipped with heavy duty trigger gun and quick change 0°,15°,25° and 40° nozzles.<br /> THIS PRODUCT CANNOT SHIP TO CALIFORNIA

floorscrubberusa.com

Floor Scrubber USA delivers the best Floor Scrubbers, including ride-on floor scrubber, battery-powered floor scrubber, self-propelled floor scrubber, hand-push floor scrubber, cordless and corded floor scrubber. Based in California, Floor Scrubber USA is dedicated to selling high-quality Floor Scrubbers at the best price, and delivering it to you fast.

southernsweepers.com

Barredoras y fregadoras industriales en venta o alquiler, más repuestos y servicios de reparación en todo el sureste. Equipo confiable y soporte experto.

safetysourcellc.com

the safety source llc is an mro supplier, and your home for safety supplies, commercial led lighting, janitorial supplies, office supplies, food service supplies and industrial supplies.

blastone.com

BlastOne My Account Information

runyonsurfaceprep.com

Read our terms and conditions of use that govern your use of Runyon Surface Prep Rental & Supply Websites and Mobile App. Learn more.