TDLiDAR аналитика приложений для 28 июля

Capture depth. Sense everything. Stream it to TouchDesigner. TDLidar turns your iPhone into a live depth camera and 40-sensor streaming hub for TouchDesigner, OBS, Resolume and any NDI-aware tool — no capture card or tether. Tap Start NDI and it appears as a 1080p/60fps source on the network. DEPTH MODES • NDI Depth — front TrueDepth or rear LiDAR, live, with 15 colormaps, depth clipping and HD upscale. • LiDAR + Monocular (Pro) — real LiDAR sharpened by a neural network, in metres on a fixed range that never breathes. • ARKit Point Cloud (Beta · Pro) — scan people as live point-cloud silhouettes with trail, echo, sculpt, gravity and more. • Monocular Depth (Pro) — neural depth from any RGB camera, no LiDAR needed; three model tiers at 60 fps. • Point Cloud (Pro) — live motion FX, Person Only isolation, and bit-exact XYZ+RGB into TouchDesigner POP geometry. • Mesh Cloud (Pro) — scan a room into a walkable point cloud; export PLY. CONTROL & SENSORS • Show Control (free) — drive everything remotely over OSC and MIDI: 140+ parameters, mode switching, Look Presets, show blackout. • Sensors mode — ~40 on-device sensors (ARKit body/face/hands, motion, audio FFT, speech, AirPods, Watch heart rate) streamed as OSC. • Cue Deck & Align (Pro) — an OSC trigger-pad grid and a projector-warp rough-in. Everything runs on-device. No accounts, no telemetry, no analytics — data stays on your phone or LAN. REQUIREMENTS iPhone with TrueDepth or LiDAR (LiDAR modes need the scanner). iOS 18.6+. An NDI receiver on the same network. TDLidar Pro is a one-time lifetime purchase, or try everything with a 3-day pass. No subscriptions.