estore.oxinst.com的 10 大竞争对手

agarscientific.com

Circular hole, size 0.6µm dia, separation 1µm.

nunano.com

Enjoy reliable imaging every time using our pack of 10 conductive AFM probes with platinum coating on both sides, suitable for electrical characterisation in AC modes (non-contact/tapping). 40 nm platinum coating with a 5nm titanium adhesion layer on both sides of the probe and a tip radius of less

2spi.com

All SEM sample surfaces are typically coated with a thin hydrocarbon contamination due to sample preparation or storage. This contamination can affect and inhibit good resolution of the sample surface, especially in a FE-SEM. The UV Prep for SEM is the optimal system for the removal of this thin hydrocarbon film without affecting the sample itself. When stored in an open environment, samples pick up contamination through the air. Unless they are handled carefully, they will also pick up contamination through handling. The UV Prep for SEM is designed to mitigate or eliminate these effects. Why is it so important to remove this contamination prior to examination? Typical FE-SEM users are running at lower and lower beam energies. The lower the beam energy, the more sample surface detail is imaged. That same sample surface that has contaminants on it. If not removed, the user is actually imaging the contaminants, and not the true sample surface. Many times, when focusing at high magnification in order to perform analysis or capture images at lower magnification, a "black box" can be formed on the sample. In many cases, this is caused by raster burn or electron beam induced deposition (EBID) not of the sample, but of the hydrocarbon contaminants on the sample surface. Removing these hydrocarbons from the surface prior to analysis with the UV Prep for SEM can greatly reduce the appearance of this black box effect. Many users purchase new FE-SEMs in order to take advantage of their unique operating abilities (high resolution imaging at very low kV). What they don not realize is that the only way to obtain the advertised resolution of the microscope is to start with a clean sample. Even the best microscopes in the world will give poor images of dirty samples! Look through our gallery to see how the UV Prep for SEM really can enhance the image quality of a variety of materials under many conditions.

tedpella.com

electron microscopy supplies and instruments, light microscopy, atomic force microscopy, laboratory supplies

emsdiasum.com

ems is the most comprehensive source of high-quality products in all fields of microscopy & general laboratory research. browse our site today by product type.

bluestarslides.com

Our distributors are not just business partners; they are an integral part of the Polar family. Many have been with us for generations, growing alongside us

ggb.com

Picoprobe High Impedance Active Probes Edit Model Description Pdf File Size Pdf File Name 7 and 7A dc to 500 Mhz, 50 ohm 253 KB mod7.pdf 12C dc to 500 Mhz, 1 Megohm/0.1pF 80 KB mod12c.pdf 34A dc to 3.0 GHz, 10 Megohm/0.1pF 604 KB mod34a.pdf 35 dc to 26.0 GHz, 1.25 Megohm/0.05pF 331 KB […]

excelta.com

Opportunity Buys!

sauereisen.com

[...]Read More...

rentaltec.com

Explore las soluciones de equipos de prueba de RentalTec para las industrias de telecomunicaciones, A&D y semiconductores. Alquiler, Rent2Buy, arrendamiento, reparación y mucho más.