Now livetag icon
Gifting Season: The Hottest Demand Trends Now & Into 2027!Get the full report nowbanner icon

Magedori: Conduit Bending Calc App-Analysen für 19. November

Magedori: Conduit Bending Calc

Magedori: Conduit Bending Calc

  • Daisuke Yamaguchi
  • Apple App Store
  • Bezahlt
  • Produktivität
Stop hunting through preset lists for your bender. Make one test bend and the app learns how your bender actually bends. From then on, the numbers match the pipe. CALIBRATE TO YOUR OWN BENDER Benders of the same size bend differently with make, age, wear and the hand on the handle. Book values drift. Bend a 90° on a scrap piece, measure it once, and the app works out your real centerline radius for that size and keeps it. EIGHT BENDS • 90° stubs and any-angle bends • Kicked 90°: marks for the 90° and the kick, distance between them, shrink along the run • Offsets with distance between marks and shrink • Rolling offsets (new in 1.5): enter the rise and the roll, get the true offset, how far to roll the pipe, and both marks • 3-point saddles • 4-point saddles • Single bends at any angle • Parallel runs: how far to shift each mark MARKS FROM THE PIPE END, IN ORDER Results are a list of distances measured from the end of the pipe: ① bend start ② bend end ③ cut. Lay your tape along it and mark. Choose whether you measure to the back, the center or the inside, and the red line in the drawing moves to show you. TOLD WHY IT WON'T BEND, AND WHAT WILL If two arcs would overlap, the app says so, says by how much, and offers an angle that works. One tap switches to it. EMT, IMC AND RIGID, IN INCHES All ten trade sizes from 1/2" to 4" for EMT, IMC and RMC, with fractions to 1/16". Metric steel conduit (EN 61386) and Japanese JIS conduit are included too, in millimeters. NEC RADIUS CHECK Warns when the centerline radius falls below NEC Chapter 9 Table 2. BUILT FOR THE JOB SITE • No sliders. Type numbers on the keypad or tap +/- steps • Every feature works underground or with no signal • What you enter never leaves your device. To improve the app, only anonymous usage data (such as which screens are opened) is counted with Google Analytics (you can turn this off in Settings). • No ads, no in-app purchases. One-time purchase, everything included • Save calculations to history Results are a guide. Final dimensions and code compliance are the responsibility of qualified personnel following local rules and your AHJ. Requires iOS 17 or later. iPhone and iPad.
Magedori: Conduit Bending Calc

Rang speichern

Der Store-Rang basiert auf mehreren Parametern, die von Google und Apple festgelegt wurden.

Alle Kategorien in
Vereinigte Staaten--
Produktivität in
Vereinigte Staaten--
Erstellen Sie ein Konto, um die durchschnittlichen monatlichen Downloads zu sehenKontakt

Magedori: Conduit Bending Calc Ranking-Statistiken im Zeitverlauf

Similarwebs Nutzungsrang und Apple App Store Rang für Magedori: Conduit Bending Calc

Rang

Keine Daten verfügbar

Magedori: Conduit Bending Calc Rangliste nach Land

Länder mit Magedori: Conduit Bending Calc der höchsten Platzierung in ihren Hauptkategorien


Top-Wettbewerber und alternative Apps

Apps mit hoher Wahrscheinlichkeit, von denselben Benutzer:innen aus demselben Store verwendet zu werden.

Nesto

Nesto

Daisuke Yamaguchi

Truemark: Conduit Bender

Truemark: Conduit Bender

Huseyin Iris

ConduitWorker: Conduit Bending

ConduitWorker: Conduit Bending

Vikorus, LLC

ARCA ELECTRICA 電気工事ツール

ARCA ELECTRICA 電気工事ツール

daizou sakurai

Magedori: Conduit Bending Calc VS.

November 19, 2026