Total Energy Capacity [kWh] 10 Energy, 80% DoD [kWh] 1 8 Energy, 90% DoD [kWh] 1 9 Current Capacity [Ah] 200 Max & Cont. Charge Current [A] 200 Max & Cont. Charge Power [kW] 10 Max/Cont. Discharge Current [A] 2 300/200 Max/Cont. Discharge Power [kW] 2 15/10 Nominal Voltage [V] 52V, to suit 48V Inverters, min 47V, max 56V Max Recommended Inverter Total Rated Power (cont.) [kVA] 10 Battery dimensions – H x W x D [mm] 2 745x340x290 Battery Weight [kg] 89 DC Connection – Fly Leads (no. per electrode) [mm²] 4 1x50mm2 Permopower Enclosure Aluminium enclosure painted white, for use indoors or fully protected under-cover environments, ratedto IP20 Protection Shunt Trip Circuit Breaker sized to suit max current, can be tripped by BMS if critical fault, manualreset. Includes overcurrent, cell under and over voltage, temperature, weak cell detection, minimumSoC control Control Interface USB Serial protocol for troubleshooting & RJ45 for BMS & inverter communication Human Interface State of Charge display (0 to 100%), Error light, Error Reset button, USB plug for programming Warranty 5 10 years or 4 000 cycles for average 80% DoD, and max 90% DoD Service Life 5 >16 years (>5 500 cycles) expected life at 80% DoD 1, >20 years (>7 500 cycles) at 50% DoD Essential Accessories Note that for connecting the battery to a PC a USB “printer” cable is required (one is supplied with eachbattery), CAN Bus Termination Resistor – one required per battery (one included with battery), CAN Buscable (RJ45 LAN cable) – one required per battery (not supplied with battery). Note some inverters willrequire a special (non-standard pin configuration) cable – see installation manual.