Los 10 principales competidores de rumoh.eu

soundimports.eu

For high-load applications, wire-wound cement resistors with a continuous load capacity of 25 watt are a great option.

madisoundspeakerstore.com

Scan-Speak 4.5" Illuminator Midrange 12MU/4731T-00- 120mm- 4 ohm   Low Q for relatively deep midrange response. The Illuminator woofers are in every aspect unusual designs with the open construction, the extremely long linear excursion and patented under-hung SD-3 (Symmetrical Drive) neodymium motor system, which due to copper caps and its construction ensures very low distortion, adding the unique patented cones, low-loss linear suspension the result is: ”The Very Best Money Can Buy”! The Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside airflow around the motor and with the very open cast aluminum chassis design the driver is virtually free from compression. The under-hung voice coil is precision wound with CCAW ribbon wire on a titanium bobbin for a low loss yet high power handling design. The vented pole piece has contoured openings to eliminate any hint of turbulence noise. The uniquely shaped top plate and open air frame ensure there is virtually no dynamic compression caused by restriction of the diaphragm back wave. Neodymium magnet Under hung motor system One piece cone and dust cap, full cone technology Very Wide Frequency Response 100-10KHz Patented Symmetrical Drive (SD-3) Low-loss Linear Suspension Foam surround High Output 90dB @ 2,83V Madisound recommends: a 2 liter sealed enclosure, loosely filled with wool or acousta-stuf. Your F3 in this enclosure is 185 to 200Hz, depending on the amount of stuffing.

speakerenco.nl

HDS Woofer, 6.5” (165 mm), GF cone, cut alu basket, 8 ohm

audiohobby.eu

Shop powered by PrestaShop

nonsolospeakers.com

Nonsolospeakers instruments for music reproduction

daytonaudio.com

Quick Overview The Dayton Audio OmniMic 40k is a powerful and precise acoustic measurement system, perfect for optimizing audio systems at any level. Featuring a compact USB omnidirectional microphone with a 4 mm capsule, the OmniMic 40k delivers calibrated measurements from 5 Hz to 40,000 Hz with high fidelity and minimal variance, even off-axis. Its stainless steel construction ensures durability, while the included Photolink device allows accurate time-of-flight and phase measurements, essential for speaker design and system calibration. With capabilities including frequency response, SPL, harmonic distortion, and room acoustics analysis, along with intuitive software, the OmniMic 40k provides professionals and hobbyists with everything needed to design and refine audio systems. Product Highlights Accurate response from 5 to 40,000 Hz using the unique calibration files High dynamic range allows precise and distortion free measurements up to 145 dB Instantly calculates acoustic time of flight providing actual delay and true phase response Custom 4 mm capsule and small aperture enable omnidirectional performance up to 40 kHz Measures frequency response, true phase, distortion, SPL, loudspeaker compression, and much more Quick and easy setup, even beginners will be making precision measurements in minutes Rugged stainless steel microphone body and tip tolerates accidents and less than gentle handling Product Manuals / Spec Sheets / Downloads Dayton Audio OmniMic Software Dayton Audio OmniMic Test Tracks Dayton Audio OmniMic 40k User Manual Buying Options Buy on Parts Express Buy on Amazon Buy Internationally

hifisound.de

fast delivery with competent helpdesk. loudspeaker diy since over 39 years. hifi and high end components at low prices.

eltim.eu

we supply high quality audio parts to oem's, dealers and endusers (by webshop) throughout europe.