Analyse de l'application SQ+ MixPad pour le 22 octobre

SQ+MixPad allows control of an SQ+ console over a wired or wireless network. It can be used simultaneously and independently of the SQ+ surface/hardware controls, so it can provide supplementary local control as well as giving the engineer the freedom to move around and mix from different listening positions. Three devices running SQ+MixPad can be connected and used at the same time as using the SQ+ itself, giving four separate points for control of all mixes. V2.0.3 - This version works with SQ5+, SQ6+ or SQ7+ consoles running firmware V2.0.x Please note: It is NOT compatible with SQ-5, SQ-6, SQ-7 or SQ-Rack mixers. It provides the following: Level and Routing Control - Send levels, panning, assignments, pre/post settings and mutes from all channels to all mixes and from mixes to outputs Send and Return levels for FX and RackUltra FX Routing screen with overview and full control DCA and Mute Group control, including assignments Processing Control - Input channel Preamp/DEEP Preamp Model/HPF/Gate/Insert/PEQ/Compressor Mix channel Ext In/Insert/GEQ/PEQ/Compressor DEEP expanders, compressors and GEQ’s FX Parameters and FX Return PEQ RackUltra FX Parameters and return channel PEQ’s Access to all Libraries Patching – Full patching matrix for all Inputs/Outputs and Tie Lines Access to Patch Library ‘1-to-1’ diagonal block patching Offline Mode – Edit and manage Shows, Scenes and Libraries without a connection to the mixer Transfer entire shows between MixPad and an SQ+ Share/store shows to cloud or email (when available on the device) Other features include – Scene/Cue Management Global filters, scene filters and channel safe control Works with unit User Permissions Copy/Paste and Reset functionality Ganging setup AMM control and setup SQ Drive Control Full control of Signal Generator and assignments 6 custom layers with the ability to copy or use/follow desk layers All input/output/processing metering Meters and Channel RTA view and control Mixer Config PAFL setup and selection Channel naming/colour SoftKey and MIDI strips setup and use Follow mixer Channel/Mix Select option