Les 10 concurrents airshaper.com les plus visités

simscale.com

Hi @igaviano, I’m currently working on a project that includes a simulation task involving fluid flow analysis. Since this is a one-time requirement and I won’t be using the software regularly, I’d prefer not to purchase a full license. Would it be possible for your team to assist with the simulation, or provide expert support to help complete this part of the project? Looking forward to your suggestion. Best regards, Shailendra Sharma

openfoam.com

OpenFOAM - Official home of The Open Source Computational Fluid Dynamics (CFD) Toolbox

lavision.de

Fluidmechanik 2D/3D Strömungsfelder PIV, PTV, STB

airflowsciences.com

airflow sciences is the best choice for fluid dynamics and thermal engineering consulting, specializing in cfd and physical flow modeling, field testing, test hardware and software.

lifecycleinsights.com

PTC and Hexagon both talked a lot about IoT in their conferences. But how they talked about them were dramatically different. This post provides a quick summary of how different they were and a little advice on how to apply IoT to your company.

ladybug.tools

ladybug tools home page

symulacfd.com

Podemos adaptar y parametrizar cualquier proceso de simulación CFD. Podrás contar con tu propia aplicación de simulación CFD automatizada en la nube.

www1.grc.nasa.gov

Here are a few frequently asked questions about how NASA and its team of medical physicians, psychologists, nutritionists, exercise scientists, and other

jafmonline.net

This work explores the performance improvement of a Savonius Hydro Turbine (SHT) installed inside a 4-inch pipeline by examining the combined effects of the guide-vane angle and central-shaft opening ratio were assessed through Computational Fluid Dynamics simulations supported by experimental measurements. Five turbine configurations (M5-1 to M5-5) were analyzed with the SST-enhanced k–ω turbulence formulation under guide-vane angles of 0°, 25°, 30°, and 35°. The results revealed that both parameters significantly influence the flow field and turbine efficiency. The central-shaft opening reduces reverse flow and torque reversal acting on the retreating blade, whereas the guide vane channels the incoming stream toward the forward-moving blade. Among all configurations, the M5-3 turbine (30 % opening, 35° guide vane) exhibited the most favorable performance, yielding maximum power coefficient (Cp,max) value of 0.3969 (simulation) and 0.3778 (experiment) at Tip Speed Ratio (TSR) close to 0.59. These represent 233 % and 257 % improvements, respectively, compared with the case without a guide vane (M5-3, 0° guide vane). Compared with the solid-shaft turbine (M5-1, 35° guide vane), Cp increased by 48 % (simulation) and 55 % (experiment). The deviation between simulated and experimental Cp ranged from 5.06 % to 12.38 %, decreasing with increasing guide-vane angle, validating the CFD predictions. The combination of a 30 % central-shaft opening and a 35° guide-vane angle produced the most efficient flow interaction, showing strong potential for low-head, in-pipe hydropower recovery in industrial and municipal pipeline systems.

buildyourownracecar.com

Racing organizers where you can find rules and regulations to help you build your own race car.