Les 10 concurrents mee-inc.com les plus visités

meic.com

mechanical, metallurgical, chemical and physical testing and failure analysis

engelmet.com

Engel Metallurgical is an ISO-accredited testing lab in MN and our dedication to excellence extends to our Privacy Policy.

exponent.com

Breakthrough insights for materials science and electrochemistry product development across industries.

seakexperts.com

seak is the #1 rated expert witness directory. contains over 2,000 experts. free to search. search by specialty, name, or location. attorneys contact experts directly, no middleman.

2spi.com

All SEM sample surfaces are typically coated with a thin hydrocarbon contamination due to sample preparation or storage. This contamination can affect and inhibit good resolution of the sample surface, especially in a FE-SEM. The UV Prep for SEM is the optimal system for the removal of this thin hydrocarbon film without affecting the sample itself. When stored in an open environment, samples pick up contamination through the air. Unless they are handled carefully, they will also pick up contamination through handling. The UV Prep for SEM is designed to mitigate or eliminate these effects. Why is it so important to remove this contamination prior to examination? Typical FE-SEM users are running at lower and lower beam energies. The lower the beam energy, the more sample surface detail is imaged. That same sample surface that has contaminants on it. If not removed, the user is actually imaging the contaminants, and not the true sample surface. Many times, when focusing at high magnification in order to perform analysis or capture images at lower magnification, a "black box" can be formed on the sample. In many cases, this is caused by raster burn or electron beam induced deposition (EBID) not of the sample, but of the hydrocarbon contaminants on the sample surface. Removing these hydrocarbons from the surface prior to analysis with the UV Prep for SEM can greatly reduce the appearance of this black box effect. Many users purchase new FE-SEMs in order to take advantage of their unique operating abilities (high resolution imaging at very low kV). What they don not realize is that the only way to obtain the advertised resolution of the microscope is to start with a clean sample. Even the best microscopes in the world will give poor images of dirty samples! Look through our gallery to see how the UV Prep for SEM really can enhance the image quality of a variety of materials under many conditions.

andersonmaterials.com

Contact us to discuss your materials characterization and analysis, quality control, and failure analysis needs!