micronixusa.comの競合サイトトップ10

micronix-jp.com

スペクトラムアナライザ／シグナルアナライザ 電波暗箱シールドボックス EMC試験システム 可変アッテネータ ETC/DRSC試験システム

chieftek.com

Power-Free, Precision-Driven — A Smarter Way to Change Tools Automatic tool change enhances efficiency and reduces downtime. cpc system for micro-robots features a compact holder, joint, […]

allmotion.com

The ServoStick was designed to allow a first time user to learn to move a DC brush servo motor intelligently in under half an hour. Housed in a USB Stick measuring only 2" x 1" x 0.5” thick, the fully intelligent servo motor Controller + Driver is capable of moving servo motors at up to 0.5A current. The servo motor power and encoder are wired to the stick as shown in the wiring diagram. When inserted to the USB of PC, the drive draws power up to 0.5A from the PC, which is adequate to drive a small motor. The ServoStick appears as a Virtual Com Port, and commands are easily sent via ASCII text from any serial terminal program (such as HyperTerminal) or from the EZServo Windows application. The Commands are intuitive and simple. For example, the command A10000 will move the servo motor to A bsolute position 10000. This communications protocol is compatible with devices that use the Cavro DT or OEM protocol. The ServoStick is also capable of stand-alone operation with no connection to a PC. It can be set to execute a preset string of commands upon power up (i.e., only power is required in this mode). The Commands include nested loops and execution halt pending a switch closure, which is useful in stand-alone applications. The ServoStick Servo Motor Controller + Driver is a good match for most DC Brush motors of diameter 1” (25mm) or smaller. See our full line of servo-driven products. Let's Talk About Your Project

facebook.com

log into facebook to start sharing and connecting with your friends, family, and people you know.