Wire Gauge Calculator: Cable 앱 분석 (11월 16일)
Wire Gauge Calculator: Cable
- YUZUHub UG (haftungsbeschrankt)
- Apple App Store
- 유료
- 유틸리티
Size every cable, fuse and battery for a 12 or 24 V system — then hand over a wiring diagram and parts list as a PDF.
Cable turns wire-gauge guesswork into a complete DC plan. Add your loads, batteries, chargers and solar, and get correct cross-sections in AWG or mm², fuse ratings, voltage drop, runtime, charge time and your daily energy balance — plus a bill of materials you can actually shop.
WHAT YOU GET
- Cable sizing in AWG or metric: every result satisfies both your voltage drop budget and the current the cable has to carry
- A voltage drop budget per system — 3 %, 5 % or 10 %, the way ABYC separates critical from non-critical circuits — with an override per load, so the bilge pump gets 3 % while cabin lights stay at 10 %
- Choose 70 °C PVC wire or 105 °C marine wire, and mark runs through the engine room for derated ampacity
- Fuse ratings from standard sizes, never above what the recommended cable can carry
- Complete system model: loads, house and starter batteries, solar, chargers and alternator
- Daily energy balance: consumption in Ah and Wh, yield from solar (panel Wp × sun hours), alternator and generator, and autonomy in days without shore power
- Runtime and charge-time results, checked against your own runtime and charge goals
- Duty cycle and daily on-time per load, so a fridge is not treated like a permanent load
- Sizes that keep themselves current: change a load, a length or your budget and every cable follows automatically
- Bill of materials built as you design, including main battery fuse (Class-T, MRBF or ANL), battery switch, busbars, battery cables, shunt and charger fuses, with tinned marine wire
- Export a Full Report or bill of materials as PDF, or the wiring diagram as a PNG — preview everything before you share
- Back up all your systems as a file and restore them on iPhone or iPad
- Works offline: every calculation runs on device, in the van, on the boat, in the workshop
- iPhone and iPad, in English, German, Spanish, French and Dutch
BUILT ON REAL ENGINEERING
Cross-sections come from standard AWG and mm² ladders instead of rounded guesses, and never go below 1 mm² / 16 AWG. You enter the one-way length; voltage drop is calculated over the whole run, there and back, for copper conductors. Current-carrying capacity follows the published ABYC E-11 and ISO 13297/10133 ampacity tables for 70 °C and 105 °C conductors, and a fuse is never recommended above the capacity of the cable it protects. Every number is visible, so you can check it before you cut a single cable.
WHO IT IS FOR
- Van and RV conversions
- Boats, marine installs and off-grid cabins
- Workshops, service technicians and installers who need a document to hand over
- Anyone who would rather calculate once than replace a melted cable
FROM IDEA TO INSTALLATION
1. Create a system and set its voltage drop budget and wire insulation
2. Add loads from the component library
3. Add house and starter batteries, chargers, solar or an alternator
4. Read cable sizes, fuses, runtime, daily balance and warnings
5. Export the report and buy the parts
One-time purchase — pay once, use forever. No account, no ads.
Get Cable today, add your first load, and know your cable size in under a minute. Build safer, build smarter.
스토어 순위
스토어 순위는 Google과 Apple이 설정한 여러 매개변수를 기반으로 합니다.
모든 카테고리 ·
미국--
유틸리티 ·
미국--
월평균 다운로드를 확인하려면 계정을 만드세요문의하기
Wire Gauge Calculator: Cable 순위 통계 추이
Wire Gauge Calculator: Cable의 Similarweb 사용량 순위 및 Apple App Store 순위
스토어 순위
순위
11월 16, 2026