Топ-10 конкурентов hytekgb.com

fueldump.co.uk

Shop our full range of products at FuelDump, including Oil Heating Equipment, Refuelling & Liquid Transfer and AdBlue / DEF Equipment.

commercialfuelsolutions.co.uk

Fuel Stations were developed specifically for the safe, secure and environmentally responsible storage of fuel. The Harlequin Fuel Station 2500FS is a popular choice for customers looking to store diesel safely on-site and features everything required to be able to store and dispense diesel safely and efficiently. A 2500 litre fully funded tank is fitted out with a 230v integral dispensing system which consists of a self-priming diesel transfer pump, mechanical flow meter, 6m delivery hose and automatic nozzle. All of our Fuel Station storage systems are engineered from suitable materials ensuring that your fuel is not compromised by coming into contact with incorrect materials of construction. The system is fitted with the market-leading Cim-Tek Hydrosorb Filter ensuring that clean fuel reaches the vehicle free from water and foreign matter. Failure to store and handle your fuel in accordance with the Environment Agency's guidelines may result in a penalty or fine. All of the Fuel Stations we supply are manufactured to ensure that your fuel is both stored and dispensed correctly. For information on current legislation and recommendation, please visit our resources section from the top navigation bar. Installing a fixed storage tank is not difficult, in the unlikely event that the proposed site does not already meet the tank installation requirements preparing a suitable base is straightforward. Once ready for delivery, the tank is offloaded and only requires a 230v supply to prepare it for use. The 2500FS Fuel Station is supplied as standard in 230v. 110v, 12v & 24v versions are also available at no extra cost. Please note that under current DSEAR (Dangerous Substances and Explosive Atmosphere Regulations) the maximum annual permissible use of these tanks is limited to 20000 litres per year. Our team of Sales Engineers can offer advice on this matter.

oilybits.com

4 Litre Closed Circuit Aviation Fuel Sampler 'CCS' Visijar Full visual aviation fuel checking in a closed system No fuel spillage Easy detection of dirt and water No sample contamination Easy to clean Direct drainage under gravity Water Detection, Density, and Temperature Checking Options NEW Feature 2026> Ability to mount as left hand or right hand entry NEW Feature 2026> Optional Secondary Chamber with 2 tubes for Thermometer and Hydrometer, replacing previous internal tubes. NEW Feature 2026> Optional mounting bracket available for retro-fit with previous design and to fit to support stand. NEW Feature 2026> Optional Offshore Paint (White) Introduction The accepted method of checking the cleanliness of aviation fuel is the 'clear and bright' test, where fuel is swirled around in an open bucket or clear glass jar and visually inspected. However this procedure carries the risk of sample contamination from the elements or from dirty sample points. There is also a high probability of fuel spillage and contact with operations staff. The Closed circuit Sampler 'CCS' has been developed to overcome these problems and actually improives sampling procedures, and as a result it is in widespread use with refueling companies all over the world. JIG Bulletin 123 & JIG TID No 3 detail the design, use, and maintenance of the CCS. With this in mind, the manufacturer has developed this 2026> updated version to assist with visual appearance checks. Description and Operation The CCS consists of a clear glass tube fitted with a white epoxy coated conical base to assist in the detection of dirt and water, sediment and suspended matter. The CCS is fitted with a hinged cover that fully opens to allow for easy cleaning. The base incorporates a tangential inlet port to promote vortexing of the incoming fuel, and a close coupled stainless steel drain valve. The inlet port should be connected to the sample points using small bore tubing (typically 10mm diameter), and we recommend fitti

bellflowsystems.co.uk

Max Flow rate 200 kg/min (20:1 Turndown)Liquid Accuracy +/- 0.1% (See options)Gas Accuracy +/- 0.5%Repeatability +/- 0.05%Tube Material 316 Stainless Steel40 Bar Max W.P (Subject to connections)DN25 Flanges PN40 (See options)Process Temp -70 to 160 Deg. C (See Options)Remote Display 24V DC or 85~265V AC, 50/60 HzAtmospheric Temp -30 to 60 Deg. CIP67 Ingress Protection RatedCable Length 5m (See options)4-20mA, pulse ,Modbus RTU RS485 (HART optional)ATEX (Flow Sensor) - II 2G Ex db IIC T6...T1 Gb ATEX (Transmitter) - II 2G Ex db [ib] IIC T6...T1 Gb

rpm-fuels.co.uk

rpm fuels & tanks stocks bunded diesel fuel storage tanks, domestic heating oil tanks, transfer pumps & more in a range of quality brands.

centretank.com

Looking for a trusted supplier and stockist of fuel dispensing, tank and AdBlue equipment? We at CTS have 35 years experience doing exactly that.

gpi.net

We’ve been building superior products since 1972 in the heart of the Midwest – Wichita, Kansas, USA. We are home to GPI®, GPRO®, and FLOMEC® brands, dedicated to providing our customers with the most reliable products and superior lifetime performance.

xylemflowcontrol.com

Xylem is a leader in developing innovative water solutions through smart technology. Learn more about Xylem's water, wastewater and energy solutions.

tankservices.co.uk

Equipment used in various industries to protect workers from potential hazards and ensure their safety. PPE - Safety Equipment , Boots, Head Lamps, Column Guards, Barriers , are a small selection of products we have available. ready to ship from our UK Warehouse.